Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Over pipe installation?? (https://www.ft86club.com/forums/showthread.php?t=61336)

Jellyhead 03-21-2014 08:12 PM
Over pipe installation??
 
Ok so I've got my over pipe and have gone to install it, but cannot remove the factory one. Is there any tips or hints to remove the factory component without raising the engine? Any info would be greatly appreciated.

Bonks86 03-21-2014 08:27 PM
remove the heat shielding

jonbonazza 03-21-2014 08:37 PM
The easiest way is to just jack the engine up a bit and it will slide out. You will need to undo the motor mount closest to the OP though.

Clipdat 03-21-2014 08:41 PM
Quote:
Is there any tips or hints to remove the factory component without raising the engine?
Quote:
Originally Posted by jonbonazza
The easiest way is to just jack the engine up a bit and it will slide out. You will need to undo the motor mount closest to the OP though.
Reading comprehension -1

Bonks86 03-21-2014 09:00 PM
Quote:
Originally Posted by Clipdat (Post 1617081)
Reading comprehension -1
lol

fantah 03-21-2014 09:09 PM
theres a forum on this, heres the link.


http://www.ft86club.com/forums/showt...light=overpipe

Jolaessss 03-21-2014 09:20 PM
[ame="https://www.youtube.com/watch?v=a9jGtvmtflA"]Perrin Performance Over Pipe and Front Pipe - Unboxing, Install and Review - 2013 Subaru BRZ - YouTube[/ame]

good luck!:thumbsup::thumbsup:

jonbonazza 03-21-2014 09:43 PM
Quote:
Originally Posted by Clipdat (Post 1617081)
Reading comprehension -1
Woops. Good call. :P Sorry, just glanced and figured it was another one of "those" threads. haha Apologies to all parties involved. :x

As mentioned before, the only other way really is to remove the heat shielding, but this is even more of a pita than just raising the engine.

Jellyhead 03-21-2014 10:44 PM
Looks like I'll have to bring it to a shop around here I was looking at getting a tune from anyways, thanks all!

Vmax911 03-22-2014 01:05 AM
I dropped the front pipe and pulled it out that way.

Gt86_nick 03-22-2014 01:51 AM
Quote:
Originally Posted by Clipdat (Post 1617081)
Reading comprehension -1
LOLS:lol:

Carlitoz3 03-22-2014 03:20 AM
Quote:
Originally Posted by jonbonazza (Post 1617067)
The easiest way is to just jack the engine up a bit and it will slide out. You will need to undo the motor mount closest to the OP though.


Are those motor mounts at that point easy to remove?
Slapping on my new headers/OP/FP soon, figured it be a good time to try out those perrrin/cosco motor mounts.

jonbonazza 03-22-2014 04:47 AM
Quote:
Originally Posted by Carlitoz3 (Post 1617762)
Are those motor mounts at that point easy to remove?
Slapping on my new headers/OP/FP soon, figured it be a good time to try out those perrrin/cosco motor mounts.
It's just a single bolt.

Sent from my Nexus 4 using Tapatalk

FRS Dab 06-12-2020 02:57 PM
What did this cost you?
 
Quote:
Originally Posted by Jellyhead (Post 1617340)
Looks like I'll have to bring it to a shop around here I was looking at getting a tune from anyways, thanks all!
How much did you get charged to have the overpipe swapped out. Just curious was looking at having the same done


All times are GMT -4. The time now is 09:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.