Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Anyone has Stroked and Built FA Engine yet ? (https://www.ft86club.com/forums/showthread.php?t=60555)

Whitigir 03-12-2014 07:03 PM

Anyone has Stroked and Built FA Engine yet ?
 
Anyone out there ? I can't wait until I can pop a Used 86 for 15k and throw in 7k for a Brand New Stroked and Built NA Engine to drive the heck of it on the track.

Xinshadow 03-12-2014 11:33 PM

Quote:

Originally Posted by Whitigir (Post 1594498)
Anyone out there ? I can't wait until I can pop a Used 86 for 15k and throw in 7k for a Brand New Stroked and Built NA Engine to drive the heck of it on the track.

As far as I know it's not really a viable option at this point, as there's too little material to work with in the cylinder walls. HKS did some work with stroker kit, but they were only able to get it to 2.1L so the gains were minimal, there's a thread here:

http://www.ft86club.com/forums/showt...ht=stroker+kit

If you want to stay NA then just get all the bolt-ons and a good tune and that should be plenty of oomph for the track.

That said, I'm also patiently waiting for cams, afforable TBs and possibly an intake manifold combined with more tunning down the road to give me some options once the factory warranty is up and my car retires to full time summer toy status :D

Turdinator 03-13-2014 01:28 AM

There were some threads with people looking to put our FA20 heads on a FB25 block. But there has not been anything i have seen saying they were successful.

Levi 03-13-2014 11:26 AM

I think the market is too small, not many would pay 5-7K for a 2.5l 300 PS NA engine.

Whitigir 03-13-2014 12:28 PM

Quote:

Originally Posted by Levi (Post 1596075)
I think the market is too small, not many would pay 5-7K for a 2.5l 300 PS NA engine.

You would be surprised. I come from Turbo engines, and all I can tell you is that the Maintenance requires on the Turbo engines are Mind-Blowing, turbo lag, respond, boost creep etc.....

I would love to have an NA pushing 250 HP with 7500-8000 RPM.

The reason why S2000 is not making the list = Need Roll cage at the closest track to my place.... :bow:

Whitigir 03-13-2014 12:29 PM

Now, can somebody Please tell me what Bolts on do you add on your NA to have about 220+ HP ? Together with a Tune...

SCharged 03-14-2014 10:32 AM

Quote:

Originally Posted by Whitigir (Post 1596213)
Now, can somebody Please tell me what Bolts on do you add on your NA to have about 220+ HP ? Together with a Tune...

No dyno here, but I'm running TRD intake Lachute Performance OPFP, and a somewhat aggressive unichip map, and pulling in 3rd/4th is almost equal to an AP1 s2000. A full 3rd gear pull and my front bumper is at his door.

Whitigir 03-14-2014 11:48 AM

Quote:

Originally Posted by SCharged (Post 1599038)
No dyno here, but I'm running TRD intake Lachute Performance OPFP, and a somewhat aggressive unichip map, and pulling in 3rd/4th is almost equal to an AP1 s2000. A full 3rd gear pull and my front bumper is at his door.

That is very good to know :party0030:

Thank you very much :)

SCharged 03-14-2014 04:08 PM

Quote:

Originally Posted by Whitigir (Post 1599181)
That is very good to know :party0030:

Thank you very much :)

I should've mentionned that that was on 94 octane.. which makes the aggressive map safer. (Kind of ''individual results may vary'')

Whitigir 03-14-2014 04:20 PM

oh :( I don't think there is any 94 gas station in Ohio though. That was good to know. Thanks again

Levi 03-14-2014 06:13 PM

Quote:

Originally Posted by Whitigir (Post 1596210)
You would be surprised. I come from Turbo engines, and all I can tell you is that the Maintenance requires on the Turbo engines are Mind-Blowing, turbo lag, respond, boost creep etc.....

I would love to have an NA pushing 250 HP with 7500-8000 RPM.

The reason why S2000 is not making the list = Need Roll cage at the closest track to my place.... :bow:

Me too. S2000 is not a Coupé unfortunately. GT86 is not "race" enough. I'd love it to be like a "cheap" 911 GT3 RS.

mad_sb 03-14-2014 06:31 PM

Quote:

Originally Posted by Whitigir (Post 1596213)
Now, can somebody Please tell me what Bolts on do you add on your NA to have about 220+ HP ? Together with a Tune...

The search button can :party0030:


All times are GMT -4. The time now is 05:39 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.