What should I do? (Fender dent/bent）
 

Few days ago I was driving to the gym and I switched lane on the hwy and couldnt dodge a tire that was on the ground and ran over it and this happened..

I went to the scion dealer and they said I would have to replace the whole fender and paint color match the hood and door. The quote i got was around $1,000 ):

So, now i feel like maybe i should just switch over to carbon fiber fenders, which will cost me roughly around the same price (including labor and stuff)

Anyone have any better suggestions?

Attachment 69572

Sent from my Nexus 5 using Tapatalk

put on some gloves and give it a good yank

Looking at that one pic I'm laughing inside that any shop cannot fix that and blend within the fender (meaning no painting door/hood.) If you can, look for an actual bodyshop (as in non-dealer) that only does autobody repair and get a few estimates. From what I can see the only paint that is chipped is right on the edge. dusting color there shouldn't be a proablem for anyone in this field.*

*Can be hard to tell exact dmg ectent with only 1 picture...

I'll post more pictures soon , sorry only had one


Sent from my Nexus 5 using Tapatalk

Hmm sorry about that, there are more pictures on this post

http://www.ft86club.com/forums/showthread.php?t=60063

I had similar problem.

This is what I dealt with:
There are two bolts under the fender right where you would place the jack. Undo those.
On the wheel well, there are three screws with pop out sleeves, that those out.
Now that the bottom of the fender is loose, pull and shape it back into place.