FS Cusco oil cooler (water cooled)
 

For Sale $495 delivered (Australia only). New in Box Cusco oil cooler. Uses water to cool the engine oil.



I have previously installed one of these kits in another car and it works as advertised on the pdf.

I have decided not to install this one. Hence selling new in box.


http://www.cuscousainc.com/downloads...il_coolers.pdf


https://lh6.googleusercontent.com/-v...+cooler+FS.jpg

You getting something else or getting together some subie parts for an OEM style fit ?

On your other vehicle with that setup, did you also notice lower coolant temp, like they show in the PDF? I have a hard time wrapping my mind around that.

I wrote off the first car. I don't need to fit an oil cooler to this car because I am not taking it to the track.

This post is my result from the track. I didn't closely monitor coolant temp. However, It stayed pretty constant at around 90 degree C
http://www.ft86club.com/forums/showp...2&postcount=82

Interested. PM'ed...if you will ship oerseas

Does this replace any of the existing radiator hoses, or just splice into them?

Don't want to have to replace my shiny new red perrin hoses.

just splice. need sharp cutter, like a rose pruner.

Bump. Still for sale.


If you are after this type of cooler, remember that this is a Subaru cooling core from the STI impreza with the long bolt/stem. These alone cost around $450 new.

still for sale?

Sold.
Sorry, I forgot to update.