Automatic Transmission Reving Start
 

Is there a way to rev the engine past about 2.4K RPM in an Automatic FR-S from a stand still. Naturally, I can only get mine to about 2.4K RPM before the rear end breaks loose into a burn out.

Put it in park, step on the gas, profit??:iono:

What exactly are you trying to accomplish?

he's trying to racecar his racecar.

I would assume he wants to launch it.

But no, there is no way other than the classic neutral bomb. Not recommended.

Some guys do brake + gas then let off the brake during the autocross.

Neutral drops? You're the guy they don't like at service centers.

Awww… Adorable.

If you're interested, the guys over at Club3G forums did a little write up of this:

http://www.club3g.com/forum/drag-rac...ipped-car.html

It's pretty much what @frslee was talking about.

That poor car.

You can also raise your AT stall rev limit with the SSP Torque Converter. Search this forum for SSPkris threads...


http://www.sspperformance.com/brz-fr...converter.html

he wants a high speed stall tq converter

I was hoping that this wasn't the type stupidity that the OP was wanting to do. Benefit of the doubt and all that jazz..

He thinks he drives a GTR