Trd muffler garnish
 

Has anyone actually done a step by step process for this? I'm receiving it today and i want to see if anyone has any tips or can help out with the whole process

:party0030: Thanks for ordering from us. :party0030:

The TRD Rear Muffler Garnish (Cut-out) Template has pictorial instructions (diagrams) to guide you through the installation step-by-step. Although the written instructions are in Japanese, the diagrams are very detailed and hope you can make sense of it :D

Thanks again :thanks:

I put mine on over the summer. Japan parts forgot the template so I had to wing it. Marked it with painters tape, cut it with a dremel, and put some black silicone on the side with no weather strip. It was a lot easier than I thought.

PS. Make sure you have it lifted or on ramps so you have room to drill the bottom holes.