Wheel Directory: OEM Nissan Skyline R33 17x9.0 +30
 

http://www.darrendriven.com/ft86/title.png


Im trying to run these wheels really soon and im just wondering if i need to roll fenders? I'll be on 15mm spacers conversion and 215/45/17 tires. How much camber should i run in the front and rear? :iono:

any suggestions?

Why are you running spacers? 30+ should already give you plenty of poke.

Because R33 GT-R wheels are 5x114.3mm

-alex

Pics?


For me, there is no glide in pulse and glide :p

Post some photos!

To be accurate, these are GTR copies but you'll get the idea
http://i294.photobucket.com/albums/m...ps1876877b.jpg

Are the wheels +30, or are they +45 with a final offset of +30 including the adapters? If the wheels are +30 your final offset is +15 which is huge amounts of poke with a 9" wheel.

Also, 215's on a 9" wheel? Yikes.

9" et30 is already poking nearly 5mm in the front. Adding another 15mm you'll definitely need some fender work ide think. That 215 tire would be a must imo depending on ride height. Ide just get a hub conversion for the front.

The 5mm poke could easily be fixed with another degree or so of camber, the 15mm more will probably need pretty extreme camber and/or fender pulling to make it fit.

i run a 9 et30 with a 245 all around. fits perfect with a two finger wheel gap and -2* camber all around. et15 will be rough though

R33 GT-R wheels are 17x9" +30 5x114.3mm

-alex

Here is my thread on my wheels, they are 8.5 +14 front and 9.5 +16 rear. The rear is stock camber while the front are what ever stance gave me.

http://www.ft86club.com/forums/showthread.php?t=38680

Funny, I just saw a set on craigslist.

http://eugene.craigslist.org/pts/4342408200.html