Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Not loud Enough (https://www.ft86club.com/forums/showthread.php?t=59135)

Wilson15 02-25-2014 06:27 PM
what exhausts can you guys recommend thats in between N1 and Q300 in regards to loudness, other than nameless.

nlowell 02-25-2014 06:46 PM
Not loud Enough
 
Quote:
Originally Posted by Moe23 (Post 1554955)
So i just installed an Invidia Q300 exhaust, but its not as loud as I was expecting. Is that how the Q300 is or do i have to let it break in more?

Also would any brand mid-pipe fit if i wanted to do a resonator delete?

Have you heard my combo?

[ame]http://youtu.be/JBfkOVk60u0[/ame]

Q300
Nameless resonated, high flow cat combo
Openflash header
K&N filter

Here is one I took before the header install

[ame]http://youtu.be/Ztt6vhU7Y7Q[/ame]

The rest of the adds really open up the Q300 sound. Personally I wouldn't want anything louder but that is just my taste. I already turn a lot of heads when I go WOT.

Hardrock4445 02-25-2014 07:02 PM
Quote:
Originally Posted by BRZPDX (Post 1554967)
Q300 is very quiet. I have a full catless EL header, 2.5 Invidia catless front pipe and the Q300 muffler and it gets loud at WOT but cruising is almost no sound. Good news is its not raspy at all going full catless.
Any sound clips? I am also Catless on EL header and I am debating the q300

Robert@Openflash 02-25-2014 07:26 PM
We have ONE Agency Power cat-less over pipe w/ a resonator front pipe combo for the FRS/BRZ if you are interested in mating it up with your exhaust. This will certainly help you achieve more sound out of the exhaust.

If anyone else is interested let me know.

Quote:
Originally Posted by Moe23 (Post 1554955)
So i just installed an Invidia Q300 exhaust, but its not as loud as I was expecting. Is that how the Q300 is or do i have to let it break in more?
Also would any brand mid-pipe fit if i wanted to do a resonator delete?

s14sleepyeyez 02-25-2014 09:39 PM
Robert can you message me a price shipped on that to 32164? Sorry for the thread jack.


Quote:
Originally Posted by Robert@vishnu (Post 1556624)
We have ONE Agency Power cat-less over pipe w/ a resonator front pipe combo for the FRS/BRZ if you are interested in mating it up with your exhaust. This will certainly help you achieve more sound out of the exhaust.



If anyone else is interested let me know.




Sent from my iPhone using Tapatalk

BRZPDX 02-25-2014 11:27 PM
Quote:
Originally Posted by Hardrock4445 (Post 1556568)
Any sound clips? I am also Catless on EL header and I am debating the q300
I need to make one when I have the time. Sorry no vids atm

Moe23 02-26-2014 12:50 AM
Ive decided to sell the Q300 and probably just get the Berk muffler delete, sounds nice and its very simple.
Thanks for the help everyone

StormTrooper 02-26-2014 12:59 AM
From the most quiet to the loudest huh..... Good luck.

boredom.is.me 02-26-2014 01:21 AM
Quote:
Originally Posted by Moe23 (Post 1557532)
Ive decided to sell the Q300 and probably just get the Berk muffler delete, sounds nice and its very simple.
Thanks for the help everyone
talk about a plot twist

Jolaessss 02-26-2014 04:56 AM
Invidia N1 with RevWorks UEL Headers
 
[ame]http://youtu.be/5ZOILZRASsc[/ame]

[ame]http://youtu.be/zc0j6ruRkeg[/ame]

FR-S Matt 02-26-2014 07:48 AM
N1 + UEL ftw. Best sounding UEL exhaust I have found yet. Sounds like a WRX.

congee 02-26-2014 03:44 PM
Quote:
Originally Posted by Moe23 (Post 1557532)
Ive decided to sell the Q300 and probably just get the Berk muffler delete, sounds nice and its very simple.
Thanks for the help everyone
Does it at least sound different from stock?

A lot of people saying its too quiet but i'm wondering if its quieter than stock or the same.

I'm also debating between the Q300 or Nameless axle back.

Love the outside noise, HP gain and polished look of the Q300 but is the quietest exhaust.

Nameless is better quality(apparently), deeper tone, inside cabin is a bit louder, $100 cheaper but is an axleback.

N_A 02-26-2014 07:23 PM
Quote:
Originally Posted by congee (Post 1558898)
Does it at least sound different from stock?

A lot of people saying its too quiet but i'm wondering if its quieter than stock or the same.

I'm also debating between the Q300 or Nameless axle back.

Love the outside noise, HP gain and polished look of the Q300 but is the quietest exhaust.

Nameless is better quality(apparently), deeper tone, inside cabin is a bit louder, $100 cheaper but is an axleback.
Q300 has a deeper tone than stock and definitely louder but not by much. It is louder outside than inside the car. I think it sounds great when I heard my car being driven away (only around the parking lot to the alignment machine;)), but it is very quiet inside the cabin. The exhaust tone is fantastic but I can use a little bit more volume.

The youtube videos actually make this exhaust sound louder than it actually is. I definitely expected it to be louder in person after watching about 500 youtube clips of this catback.


All times are GMT -4. The time now is 07:30 AM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.