Closed Project Kick Revo Lug Nuts (closed) ARP Extended Lugs
 

So I ordered Project Kick open ended lug nuts BUT things got lost in translation received closed ended lug nuts (they have a plastic cap on the top).

My question is, before returning them, is there any chance at all that they will fit ARP extended Lugs??

Anyone with experience with them?

http://store.mackin-ind.com/p/31875n...0-revo-12x1-25

http://mediacdn.shopatron.com/media/...92468046&w=440

http://www.rallysportdirect.com/cata..._7716_1_lg.jpg

Anyone......

Whitefrs hates my phone signature

The caps should put off cause the open ended kics are the same as the close ended ones they just have a black cap on top right?

I was under the impression that the closed ended lug nuts were just open ended lug nuts with a cap on it as well.

No. The threads on the R40 revo end before the edge. There's an inner groove to hold the end caps on it near the outer edge of the lug, so it's not threaded all the way through. The R40 non revo is threaded all the way through I believe

I guess I'll have to wait and see...

Took some measurements yesterday and nope, it will not work by about a quarter of an inch....