Did a bunch of loose end stuff Saturday. Adjusted my exhaust so it would stop hitting the car, worked like a charm. I was seriously starting to go insane from the tapping and vibrations! But that's all gone now, and the car actually sounds quieter from the inside haha. Then I adjusted the rear height again trying to get less wheel gap. After that I pulled in the front bumper pieces to line up with the flares better and changed out the non fouler head to one with a slightly bigger opening in hopes to prevent the too lean CEL from coming back.
https://farm8.staticflickr.com/7433/...f8769d16_b.jpg

I also installed these punny stickers for my BB fans.
https://farm3.staticflickr.com/2922/...1d0a976f_b.jpg

Now just waiting for my front wheels :|
https://farm8.staticflickr.com/7322/...8cb515f7_b.jpg
https://farm6.staticflickr.com/5078/...ebc4ac57_b.jpg
https://farm8.staticflickr.com/7348/...d826f280_b.jpg
https://farm3.staticflickr.com/2898/...caa2789e_b.jpg
https://farm8.staticflickr.com/7377/...635e6852_b.jpg
https://farm8.staticflickr.com/7331/...010eb33d_b.jpg

Lol I think you should just keep the stock wheels up front, no need to swap jk

Looks like your at the home stretch!

Nick C.

Just curious, what lug nuts are those?

Wait.... Does that say 18x10.5 and 5x100??? I thought 5x100 did not exist in 18x10.5.

They don't. A100 is the adapter, you're talking PCD which is 114.3

Ahh so your running 114 to 100 converters. How safe are those really to run? 100 wheel options are Soo limited.

With the front grill taken out, if I don't touch my wheel liner, would I be able to see through to the ground? Like you can in yours?

The Breaking Bad sticker is genius lol! Can't wait for your pics with the front wheels, it's coming along nicely!

nice work!

That's correct, it would just be all black. Mine was actually worse at first but I cut the "feet" off the liners and remounted them. Once I get my beefy wide wheels up front, I shouldn't be able to see through anymore I hope haha. Keep in mind the crash bar will show though, so you either have to remove it, chop it or buy an alternative like beat rush.

Thanks! It's one of those things that people don't always notice but when they do, it's great. haha

Are you going to keep the kit unpainted, I love the way it looks on an asphalt car. And its different from all the other rocket bunny kits out there.

Lookin sharp! Didn't know you picked up an FRS - wondered where you went over at CR...

Yeah man it was time to stop dreaming of a rocket bunny and actually make it happen haha

Front wheels are in and getting picked up tomorrow
https://farm3.staticflickr.com/2911/...5f8a0728_b.jpg
https://farm6.staticflickr.com/5574/...08b2d6b2_b.jpg

Also got my plates earlier this week
https://farm4.staticflickr.com/3844/...af32587f_b.jpg
https://farm3.staticflickr.com/2934/...8bbe66eb_b.jpg

Stay tuned. Will be posting the square setup in a few days. Random snaps until then
https://farm4.staticflickr.com/3851/...030d3d2d_b.jpg
https://farm3.staticflickr.com/2918/...2cf8b826_b.jpg
https://farm6.staticflickr.com/5515/...641d092a_b.jpg
https://farm4.staticflickr.com/3917/...91411897_b.jpg
https://farm6.staticflickr.com/5236/...803ba885_b.jpg
https://farm6.staticflickr.com/5483/...454d62ae_b.jpg
https://farm4.staticflickr.com/3873/...378561c3_b.jpg
https://farm3.staticflickr.com/2930/...0b3be7e6_b.jpg
https://farm3.staticflickr.com/2939/...9516861a_b.jpg
https://farm3.staticflickr.com/2939/...e9ebb2ec_b.jpg
https://farm6.staticflickr.com/5274/...acef1bb8_b.jpg
https://farm4.staticflickr.com/3908/...2aa615bb_b.jpg
https://farm4.staticflickr.com/3881/...0e17805b_b.jpg
https://farm4.staticflickr.com/3894/...16538365_b.jpg
https://farm6.staticflickr.com/5556/...4b2ff291_b.jpg
https://farm4.staticflickr.com/3910/...55cf29d8_b.jpg