Nitrous System w/ custom install parts
 

Selling my unused nitrous system, custom built for an FR-S. We installed it, showed it at SEMA, then pulled it all out for a supercharger. In addition to all of the new parts you will be getting custom brackets to mount the solenoids in the engine bay, a bracket to tie in the bottle through the trunk floor, and a laser engraved, anodized switch panel for the center console. This system is complete with all safety features and was designed by a master tech who used to install systems in NSX's at a race shop.

It was designed as a two stage system, with a 50 shot in the intake and direct port in the intake manifold. How you choose to run it is up to you, it's all there to do anything you want.

Retail was over $1800, asking for $1000 obo.

Part numbers:

Edelbrock parts
71008 - Base system http://www.summitracing.com/parts/edl-71008/overview/

72000 - redundant solenoids http://www.summitracing.com/parts/edl-72000/overview/

72213 - fuel psi safety switch http://www.summitracing.com/parts/edl-72213/overview/

72700 - bottle heater http://www.summitracing.com/parts/edl-72700/overview/

72950 - remote arming system http://www.summitracing.com/parts/edl-72950/overview/

76513 - inline fuel filter http://www.summitracing.com/parts/edl-76513/overview/

71905 - RPM window switch [ame="http://www.amazon.com/Edelbrock-71905-RPM-Activation-Switch/dp/B000VDI1ES"]Edelbrock 71905 RPM Activation Switch : Amazon.com : Automotive[/ame]

Zex 82108 - TPS switch http://www.summitracing.com/parts/zex-82108/overview/

Fittings - 76515, 76536, 76566
Russell stainless lines - 658090, 658080, 658320


http://imagizer.imageshack.us/v2/102...0/577/eb1u.jpg
http://imagizer.imageshack.us/v2/102...0/198/d4id.jpg
http://imagizer.imageshack.us/v2/102...90/35/0t6o.jpg
http://imagizer.imageshack.us/v2/102...0/607/7icv.jpg
http://imagizer.imageshack.us/v2/102...0/827/rrk3.jpg

I'm Intrested but doesn't nos kill your engine?

Not if you're smart about it. That's why this system was resigned with redundant solenoids (in case on sticks open), TPS switch and fuel psi switch. Basically everything has to be perfect or it won't spray.

Well that didn't take long. :bonk:

That is a clean install!

:w00t:

That's insane! Lol

That is amazingly clean! Nice job!

i saw something like this available from a dealer, but it was a firestorm.

So awesome

Bump, lots of lookers but no buyer yet.

Sold

omg hahahah

Where did you get the switch panel? Looks amazing in the center console