Matte Black Exhaust Paint?
 

I'm getting a cat-back and am not a fan of a polished stainless steel look on the tips. I have some matte black tips on my OEM exhaust now but it looks like the inlet will be a little too small. Is there a good paint to use to coat them to look matte black?

http://www.pilotautomotive.com/image...EX-1017B_3.jpg

http://image.superstreetonline.com/f...ck-exhaust.jpg

I was eyeing these two:
VHT SP102 FlameProof Coating Flat Black Paint
[ame="http://www.amazon.com/VHT-SP102-FlameProof-Coating-Black/dp/B000CPJLGM/ref=sr_sp-btf_title_1_2?s=aps&ie=UTF8&qid=1391524873&sr=1-2-catcorr&keywords=matte+black+exhaust+paint"]VHT SP102 FlameProof Coating Flat Black Paint Can - 11 oz. : Amazon.com : Automotive[/ame]

Rust-Oleum 248903 Automotive 12-Ounce High Heat 2000 Degree Spray Paint, Flat Black
[ame="http://www.amazon.com/Rust-Oleum-248903-Automotive-12-Ounce-Degree/dp/B003CT4AKC/ref=sr_sp-btf_title_1_1?s=aps&ie=UTF8&qid=1391524873&sr=1-1-catcorr&keywords=matte+black+exhaust+paint"]Rust-Oleum 248903 Automotive 12-Ounce High Heat 2000 Degree Spray Paint, Flat Black - Amazon.com[/ame]

I've had good luck with the rustolleum brand did my motorcycle exhaust with it and it lasted good, easy to clean.
http://www.rustoleum.com/product-cat...bbq-and-stove/

I did the exhaust of my truck with just high temperature radiator paint and it held up for 5 years lol

link to that exhaust?

It's the flowmaster cat back

off-topic but since you mentioned it, I have a 06 zx6r with a two brother's exhaust and the paint on the exhaust tips are chipping off. If I sanded down the chipping paint and sprayed this on, it would be viable, right?

back on topic - what about this paint? it seems like it's used for exhausts: http://www.rustoleum.com/en/product-...ints/high-heat

It should last fine I would imagine. I did my whole pipes on my v-star 1100, held up well