Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 2 of 7 1 2 3456 Last »
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Northwest (https://www.ft86club.com/forums/forumdisplay.php?f=16)
-   -   Sunday Shop Shindig CANCELLED (2/9/14) (https://www.ft86club.com/forums/showthread.php?t=56626)

Jmonty 01-28-2014 11:56 PM
I would love to install the rear under diffuser, looking to see what clips I might need?

VesperLynn 01-29-2014 12:21 AM
I'm going to reserve a spot to do my endlinks!

NickFRS 01-29-2014 01:01 AM
Quote:
Originally Posted by VesperLynn (Post 1487758)
I'm going to reserve a spot to do my endlinks!
need me to bring those stockers for u?

PoWn3d_0704 01-29-2014 01:32 AM
I've got a Perrin Front sway bar I haven't installed.... If you guys are down, I can use the lift for a bit to get that done? I can mob all the way up there that morning in time for the auto show? You all gonna meet at the show or something? I literally know NO ONE up there.

Other than that, should I get endlinks for this Sway Bar? It's the 19mm one. I don'y know if I need them, and since it's all coming apart anyways... may as well?

And then the question is Poly vs Spherical, but I don't know the difference.

503 BRZ 01-29-2014 01:53 AM
The autoshow I won't be able to make but I'd love to come hang out for a bit and meet more of the NW group.

May be a few non-lift mods I could get a hand with? (Plasti-dipping the chrome fender trim :) )

DarrenDriven 01-29-2014 12:04 PM
I think in five hours we can fit everyone in... just need to get the guys that want to use the lift in line. :)

Chen 01-29-2014 01:58 PM
Quote:
Originally Posted by PoWn3d_0704 (Post 1487932)
I've got a Perrin Front sway bar I haven't installed.... If you guys are down, I can use the lift for a bit to get that done? I can mob all the way up there that morning in time for the auto show? You all gonna meet at the show or something? I literally know NO ONE up there.

Other than that, should I get endlinks for this Sway Bar? It's the 19mm one. I don'y know if I need them, and since it's all coming apart anyways... may as well?

And then the question is Poly vs Spherical, but I don't know the difference.

end links aren't required until you get a rear one. I have the 19mm sway in front as well. Freakin pain to get in.

VesperLynn 01-29-2014 09:41 PM
Quote:
Originally Posted by NickFRS (Post 1487875)
need me to bring those stockers for u?
Nick it's okay, I found the BC ones. They should be fine in the meantime.

VesperLynn 01-29-2014 11:16 PM
I also have a 6puck ACT clutch with lightened flywheel that's been collecting dust in my garage...


If there's time after, I'd love to put this in. If not however that's totally cool I'll do it another day.

PoWn3d_0704 01-29-2014 11:25 PM
If you're putting together a list, I have a few things that are going to be ready to go on the car by the 9th.

Perrin Front 19mm sway bar
Perrin Poly/machined endlinks
(I'll defer to @Chen in terms of install time...)

I also have the new Perrin power steering mounts that replace the OEM bushings. Those should be fast.

Chen 01-29-2014 11:33 PM
Quote:
Originally Posted by PoWn3d_0704 (Post 1490354)
If you're putting together a list, I have a few things that are going to be ready to go on the car by the 9th.

Perrin Front 19mm sway bar
Perrin Poly/machined endlinks
(I'll defer to @Chen in terms of install time...)

I also have the new Perrin power steering mounts that replace the OEM bushings. Those should be fast.
Front sway bar shouldn't take long at all. You could do it on jackstands. But I do recommend 2 people to do the install. Guiding it from 1 side to the other is a pain. It took me about an hour and a half for both front/rear and end links installed on jacks.

BRZPDX 01-29-2014 11:50 PM
I guess I'll install the relays under the dash to fix the hyperblink.. What do you guys think, hyperblink = cheesy or not bad?

NickFRS 01-29-2014 11:54 PM
Quote:
Originally Posted by VesperLynn (Post 1490119)
Nick it's okay, I found the BC ones. They should be fine in the meantime.
Sounds good bud. :w00t:

m.box.design 01-29-2014 11:58 PM
hyperblink = schizophrenic


All times are GMT -4. The time now is 04:24 PM.
Page 2 of 7 1 2 3456 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.