Sms Al Suwaidi's Frs Turbo to be Build
 

SMS's Frs
http://farm4.staticflickr.com/3741/1...a57127c7_b.jpg
IMG_0736 by Jaykohens, on Flickr

So here i am trying to write up a build thread :bonk:

I bought my car on Feb 2013 after losing hope in finding a perfect car within my budget. I was never convinced with this car but after my test drive i was hooked, yeah it was slow but hell it was fun too :)

The original plan was to drop a 2jzgte in it :) but lets not get into that :iono:

The car has already been through a stage or two, and is currently back to stock (not for long).

Version 1.0
Version 1 Mod list
Buddy Club Spec II
J2 Front Pipe
Borla UEL
First mod i ever did to the car was a buddy club spec 2 catback
http://farm4.staticflickr.com/3665/9...5a61cff8_b.jpg
photo 2 by smsalsuwaidi, on Flickr
Then i added a J2 front pipe chasing the loudest 86 title :iono:
http://farm8.staticflickr.com/7449/9...784a5987_b.jpg
photo by smsalsuwaidi, on Flickr


So i settled with this setup for a while and then added this

http://farm6.staticflickr.com/5495/1...91b368db_b.jpg
IMG_00001168_hdr by smsalsuwaidi, on Flickr
:word:

out come ?
[ame="http://www.youtube.com/watch?v=biGJ3pWSDTI"]Frs Exhaust - straight pipe with a borla UEL - YouTube[/ame]

Decided to try the stance game for a while until i plan a bigger project with my car

V 1.5
Version 1.5 Mod list
Buddy Club Spec II
J2 Front Pipe
Borla UEL
Paint matched side markers
Tom Taillights
BC Racing Extreme lows 10k/10k springs
Stance Lower Control Arms
Front Fenders Pulled
Rear Fenders rolled
Rear fender tab shaved
Rotiform NUE (CAST) 18x9.5+25

I really don't have many photos of the parts but the car looked like this

http://farm6.staticflickr.com/5517/1...f9ccfc12_b.jpg
Thursday night by smsalsuwaidi, on Flickr
http://farm4.staticflickr.com/3818/1...f12d234f_b.jpg
IMG_0809 by Jaykohens, on Flickr


http://farm8.staticflickr.com/7407/1...1aa3442b_b.jpg
IMG_0749 by Jaykohens, on Flickr

Ending V1.5
Mod list
Tom taillights
Busted side markers that DO NOT stay in place
half of my underbody missing

I finally decided that its time to go back to stock as i'm fed up with being "SlowNLow :slap:"

[ame="http://www.youtube.com/watch?v=G09hGXtuaQg"]Stanced frs going back to stock - YouTube[/ame] :w00t:


[ame="http://www.youtube.com/watch?v=N2R7I76Gza0"]Stanced frs exhaust damage - YouTube[/ame] Exhaust damage from riding Low


The way the car sits as of today Friday 24th 2014:
http://farm3.staticflickr.com/2859/1...6bfde069_b.jpg
photo copy by smsalsuwaidi, on Flickr

The Turbo build, aka The Sleeper

Version 2 ! I admit it, i cheap'd out on my car before with the previous parts, but now i plan to only pay for quality pieces, or try to :)
Part list:

Engine:
MAPerformance turbo kit with a GTX3076 .63AR (Not here yet)
MAPerformance Catch Can ( Not here yet)
MAPerformance Oilpan (Not here yet)
Nameless Performance Headerback 3" inlet (One of the only TRUE 3" systems)
Perrin Motor mounts (Not here yet)
Prime Motoring Flex Fuel Kit ( Not here yet)
FIC 770cc
DW65 Fuel pump+ canister

Drivetrain:
ACT 6 Puck Clutch Kit Lightweight (not here yet)
Kartboy Short Shifter Mtec Springs (not here yet)
Motul 1L Transmission GEAR 300 75W90 (not here yet)

Exterior: AS MINIMAL AS POSSIBLE
Toms taillights

Interior:
In Dash gauge pod not sure made by who ( @Sportsguy83 can help )?
AEM Failsafe (not here yet)
MTX Dual Gauge Oil Temp/Pressure Gauge (not here yet)
Zetronix E% gauge (Not her yet)


@MAPerformance Is the kit i am going with, it is going to be Kit #1 and they have been a joy to work with until not and i hope they keep up the good communication and work once im done with the build :thanks:
Latest Photo updates of the manifold
http://i742.photobucket.com/albums/x...ps799178f9.jpg
http://i742.photobucket.com/albums/x...psd8a3be0c.jpg
http://i742.photobucket.com/albums/x...psc4887921.jpg
http://i742.photobucket.com/albums/x...ps40f2a80c.jpg
http://i742.photobucket.com/albums/x...psdd0febce.jpg
http://i742.photobucket.com/albums/x...ps142d6126.jpg
:party0030:
----------------------------------------------------------------------------------------------------------------------------------------------------------------
My Exhaust is by @Namelessperoformance thanks to @FR-S Matt , it is also piece number one (after @sportguys83 preproduction piece ) but both pieces are hand welded unlike the versions that are going to ship soon which have more bends and less welds :thumbup:

http://farm4.staticflickr.com/3753/1...9e285e46_b.jpg
photo 1 by smsalsuwaidi, on Flickr
http://farm8.staticflickr.com/7365/1...6d913ea0_b.jpg
photo 4 by smsalsuwaidi, on Flickr
http://farm3.staticflickr.com/2863/1...3c87442e_b.jpg
photo 5 by smsalsuwaidi, on Flickr
http://farm3.staticflickr.com/2881/1...28249159_b.jpg
photo 3 by smsalsuwaidi, on Flickr

:wub: The exhaust is amazing, it is something out of the ordinary, the quality is perfect and all the welds are amazing; i also hope it fits perfectly and end up having no issues
@Ryan@Namelessperformance Thank you
----------------------------------------------------------------------------------------------------------------------------------------------------------------
http://farm8.staticflickr.com/7394/1...6de8f468_b.jpg
photo copy by smsalsuwaidi, on Flickr

A fuel canister with a DW65 Pump equipped :)
----------------------------------------------------------------------------------------------------------------------------------------------------------------

http://farm4.staticflickr.com/3777/1...0d3eca79_b.jpg
photo 2 copy by smsalsuwaidi, on Flickr
http://farm6.staticflickr.com/5477/1...227cda00_b.jpg
photo 1 copy by smsalsuwaidi, on Flickr

Well packaged set of Yezzy 2's :slap: i mean the in dash gauge pod which i picked up from @Sportsguy83 ( Thank you for keeping them @ your place for a while :wub: )
----------------------------------------------------------------------------------------------------------------------------------------------------------------

Thats all i have for now :) Parts are slowly coming in

reserved

Reserved for further updates

Looking forward to this build. All the best

I look forward to read more on this build!

Damn son I should do a build thread now if I could post pics lol. I have a kartboy shifter I woulda sold you.

The Frozen North

I intend to pick up the same turbo kit when I have the time to play with my car. MAP's parts are top-notch.

I'm looking forward to reading your build! :thumbsup:

Awesome, looking at doing drag or autox or what?

@Prime Motoring built the gauge pod

Looking forward to this!!

Looking forward to this build

I can't wait to see how your car turns out my friend. Couldn't happen to a better person. Dont let any local GTR guys read this thread:party0030:

Why cant you post pics ? Lol

Why did you take it off ?


Sent from my IBrick

Its my first time dealing with them and im liking it already


Sent from my IBrick

Autox...lol

umm just a daily fast car/highway monster and ofc a bit of dragging on the strip and off :wub:


Sent from my IBrick

@Sportsguy83 nothing as cool as yours though smh .....


@MAPerformance :) thank you !
those pesky gtrs


Sent from my IBrick

looks good! can't wait to see the finished product!

I dunno the forum is telling me that photo posting was disabled by the admin. I didn't like the feel of it but that a subjective thing.

The Frozen North

Very nice build thread, like it. Very organized. I think the muffler we are looking for was discontinued or something because I CANNOT find a trace of it (but 1000% sure its custom performance engineering for a mazdaspeed3).

I found an OBX performance catback for mazdaspeed3 that looks exactly the same as mine. IF we can't find my exact one maybe you can try that one.

(Love the pic of the nike shoe box :D)

So does this mean I should make the 27hr drive to Cali for a map vs fullblown shoot lol

The Frozen North

I have always wanted to visit Cali:D Lets do it man. F*%k this cold!!!

Lol. Stupid snow, but it kinda hinders my travel plans.

The Frozen North

:laughabove: wow i'm surprised somebody said something about organization as i am one of the least organized in real life :sigh:.

Still on a mission to find it :paddle:, your car sounded amazing from the videos.


Not fair you got a built block :(

Yeah but you'll have seat time due to your lack of snow.

The Frozen North

Its pretty cold here over to .... Its 66 atm @MAPerformance :)


Sent from my IBrick

Wrinkle black intercooler hmmm pretty cool eh ? @Sportsguy83 @MAPerformance @Dipstick-sportech



Sent from my IBrick

Have I mentioned I hate you. Its -15f here with the wind and that's warmed up.

The Frozen North

:drool::drool:

Just look at the mess my build has become hahhaahaha. I either start a new one or seriously spend time recreating that first post.

Thats not mine, pulled it off instagram, i want it done but dont know if it might effect function hmmm any thoughts ?


Sent from my IBrick

I don't think it really matters. Remember, when you want the IC to cool the charge, there is huge amounts of air coming at it.

Perrin stealth black intercooler on previous sti build, this was powder coated iirc (from perrin)

Just going to see what @MAPerformance recommends a black powder coat or the wrinkle black finish


Sent from my IBrick

Aren't they both powder coat just one wrinkles?

The Frozen North

Im really not sure of the differences :/


Sent from my IBrick

Awesome build and great taste in parts! I'm also looking to go this route very soon. Looking forward to your final review of your build. Thanks and keep the pics coming!:thanks:

i cheaped out on my car with the first setup, and now im trying to do it right by buying quality parts

Thank you :) i will do

Ding ding! We have also used that VHT wrinkle black paint and it works pretty dang well as long as its done correctly.

:bow:I guess I should have posted this here lol. I'm jealous of your turbo kit
I will be following this cuz I plan to get this kit in a month or two!

I used it on a Honda valve cover and it worked well.

You should have went Full Blown then. :wub: