Wheel Directory: Advan RG III 18x9.5 +45
 

http://www.darrendriven.com/ft86/title.png

What do you guys think?

18x9.5 +45 = 17.60 pounds each

https://scontent-b-ord.xx.fbcdn.net/...21251073_o.jpg

http://cdn2.bigcommerce.com/server28....1280.1280.jpg

The actual wheel.
http://cdn2.bigcommerce.com/server28...29.600.400.jpg

Your #1 fan here. Like OH MY GOSH!!!

Awesome weight for that size...with a decent look.

You sure about that weight? I know my Advan RG-Ds were not nearly that light.

Yes sir. visited our scale.

17x9.5 +25 Advan RG-D weighs in at 18.75 pounds each.

Damn. That is some serious weight savings then. Might have to own a set of these in the future. :D

What other offsets, colors and finishes do these come in? They look good.

Also can center caps be purchased for this wheel?
Any rubbing up front what kind of camber is on one in pic?

Racing Black
Hyper Black (dark silver)
Gold

Driving under normal street conditions - no rubbing.

http://www.yokohamawheel.jp/brand/ad..._top_img_l.png

http://farm8.staticflickr.com/7348/8...8e9881c3_o.jpg

@Touge Factory

With this width and in this offset does it restrict BBK kit selection or no issue? Also obviously one has to have coilovers understood but any contact between wheel/tire to steering rods under full lock?

The Advan RG3's in this size come with Super GTR face: to allow for BBK clearance.
At full-lock with large tires 245+ you might rub on the inside fender slightly.
I say "might" because depending on type of tire and ride height, you may or may not rub, becuase it's very close.
18x9.5 +40 NT03 with 245/35/18 Yoko S.Drive there was about a 5-10mm gap, so with +45 you'd be right there.

New RG3's look similar to R34 wheels to me. Looks great in that racing black finish.

Amazing wheels, but that price

Sex!

Most concave wheels will have maximum BBK clearance. Typically a lipped wheel will have less BBK clearance.