Catch Can breather line question
 

hey guys,

I have 1 catch can inlet and 2 vent hoses. Can I just get a tee fitting and connect both hoses to the 1 inlet tube? The 2 vent hoses should both have the same pressure and should not interfere with one another I'm assuming.

Also, can a crank case vent hose run down and then up, or can it only go up?

Thanks!

This is how I plan on setting it up, if it's correct

https://lh5.googleusercontent.com/-k...o/breather.jpg

It's an Air/Oil Separator with a drain, which is why I'm running it back to the intake