Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 4 1 234
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   ***NEW***Rexpeed Convex Mirrors w/heater option for BRZ! (https://www.ft86club.com/forums/showthread.php?t=55227)

FT-86 SpeedFactory 01-08-2014 01:10 PM
***NEW***Rexpeed Convex Mirrors w/heater option for BRZ!
 
Just got these in for all the BRZ guys out there with the heated mirror option. Finally, Rexpeed has a convex mirror option for you all.

These are just like the original convex mirrors, but have the electrical connections for the heater. Check out our original thread for more information on install and before and after shots.

http://www.ft86club.com/forums/showthread.php?t=33399

Below are the new heated mirrors :thumbsup:

http://ft86speedfactory.com/images/r...rorsheated.JPG

http://ft86speedfactory.com/images/r...rsheated-1.JPG

http://ft86speedfactory.com/images/r...rsheated-2.JPG

http://ft86speedfactory.com/images/r...rsheated-3.JPG

http://ft86speedfactory.com/images/r...rsheated-4.JPG

johnb831 01-08-2014 01:13 PM
Been wait for these to come out. Thanks!!

SkAsphalt 01-08-2014 03:29 PM
Well crap! How much do these cost?

Edit $109.99 USD Not bad!

nyfries 01-08-2014 03:29 PM
Nice. I assume this work for Canadian model of frs with heated mirrors too?

Inextirpable 01-08-2014 05:14 PM
Finally! Glad I waited.

FT-86 SpeedFactory 01-08-2014 09:52 PM
Quote:
Originally Posted by nyfries (Post 1438370)
Nice. I assume this work for Canadian model of frs with heated mirrors too?
Yeppers. :)

White64Goat 01-08-2014 09:59 PM
Take trade-ins?...............damn

EmSeaSqrd 01-09-2014 03:57 PM
Quote:
Originally Posted by White64Goat (Post 1439346)
Take trade-ins?...............damn
In the same boat :/....

mid_life_crisis 01-09-2014 04:50 PM
Quote:
Originally Posted by FT-86 SpeedFactory (Post 1437989)
[B][SIZE="4"][CENTER]Just got these in for all the BRZ guys out there with the heated mirror option. Finally, Rexpeed has a convex mirror option for you all.

These are just like the original convex mirrors, but have the electrical connections for the heater. Check out our original thread for more information on install and before and after shots.
You want to really impress us, make an affordable conversion kit so those of us who don't have heated mirrors can make use of these.

Drobinson1692 01-09-2014 04:51 PM
Quote:
Originally Posted by White64Goat (Post 1439346)
Take trade-ins?...............damn
Quote:
Originally Posted by EmSeaSqrd (Post 1441344)
In the same boat :/....
just sell then get new ones - i'm sure plenty will be interested for a ~15% discount.

SkAsphalt 01-09-2014 05:02 PM
Quote:
Originally Posted by mid_life_crisis (Post 1441507)
You want to really impress us, make an affordable conversion kit so those of us who don't have heated mirrors can make use of these.
Take your mirror off (it is just fixed with clips) and see if you have wiring there, if you don't than you will not be able to make a super easy conversion kit. Running wires through the door and cleanly into your fuse box or one of the wiring hubs is not typically a plug and play kit.

However there may be instructions in the DIY area :)

Mr122 01-09-2014 05:07 PM
I have the heated indicator mirrors, I haven't bothered wiring them up yet. However, the better visibility you get from curved glass is SO WORTH IT! I feel like I'm looking in a dentist's mirror driving my other car.

hanabie 01-09-2014 05:10 PM
I custom installed mine before these came out. Yeah, these mirrors are the best investment I ever made.

I bought this heat grid

Installation is easy. Just make sure to pry out the mirror slowly. You will be okay.

mid_life_crisis 01-09-2014 05:21 PM
Quote:
Originally Posted by SkAsphalt (Post 1441558)
Take your mirror off (it is just fixed with clips) and see if you have wiring there, if you don't than you will not be able to make a super easy conversion kit. Running wires through the door and cleanly into your fuse box or one of the wiring hubs is not typically a plug and play kit.

However there may be instructions in the DIY area :)
I didn't say it had to be plug and play. Something I can work with will do.


All times are GMT -4. The time now is 01:27 AM.
Page 1 of 4 1 234
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.