WINJET Headlight Question
 

Hey guys i recently hooked up my WINJET headlights with my DIODE Dynamics Foglight kit. The kit splices into the red/black DRL wires which enables the foglights to go on when the DRLs are on, which is great. However, when you turn on the driving lights the fogs turn off.

If i was to splice into the white/black wires on the WINJET headlights with the red/black wires on the Diode Dynamic kit, would the fog lights turn on with the headlights? That is actually what i'm trying to accomplish.

Any input would be nice, thanks!

I had this exact same issue.
Use a T-Tap connector and splice into the white wire of the Winjets.
Works perfect after that.

8)

Yup yup1 already did it, now its awesome!

I was thinking about this too.

Does anyone know if that solution would work if you have the Morimoto upgrade installed?

Can you elaborate on this? Do I use both t-taps on the white headlight wire?

Can you elaborate on this? Do I use both t-taps on the white headlight wire?