Here's my black housing Winjets, did the APR Carbon Brake Ducts /w LEDs alongside.

http://i.imgur.com/bkxstCd.jpg

What type of LED kit is that?

It says in the post, APR Carbon Fiber Brake ducts, you can get them with LEDs.

Ok, I didn't know you could get them with LEDs, thanks.

Winjet Headlights (Post Your Pics)
 

Here's mine

http://img.tapatalk.com/d/14/01/20/2a5anavu.jpg


"And when I leave, come together like butt cheeks" -Grits N' Gravy

Stop using Photobucket, it's garbage. Your photo doesn't show.

Check it again. Thought tapatalk would restrict photo quality so I've been using photobucket


"And when I leave, come together like butt cheeks" -Grits N' Gravy

Nice pic!

Attachment 64788Attachment 64789

Sent from my HTC6500LVW using Tapatalk

If there is chance, can some of you post picture of light output against the wall? I want to see the cutoff line and the high-beam portion.

I couldn't find high beam shot, but here is a low beam with morimoto H7 Hid kit with XB35 bulbs

http://i305.photobucket.com/albums/n...ps69709abe.jpg

Thought someone might have posted -

Here are a couple

http://www.fteightysix.com/product_i...s/dsc09033.jpg

http://www.fteightysix.com/product_i...s/dsc09034.jpg
.
.
.
.

THE WINJET GROUP BUY LINK

THIS!
 

http://imageshack.com/a/img543/8954/kxpj.jpg

http://imageshack.com/a/img547/2567/prol.jpg[/QUOTE]

Great work! This is exactly what I was looking for and your car looks amazing!!! The black is almost too much on a whiteout (which I have) IMO and the chrome has too much...well chrome...Do you have any shots where it shows you exact paint lines? It is difficult for me to see where you painted.

Thanks!

Looks amazing! Just the way I had hoped! Thanks for responding and posting pics!!:thumbsup:

Thanks for the compliments!
I took a few more pics.

http://imageshack.com/a/img703/8520/s3yw.jpg

http://imageshack.com/a/img827/7005/fgt5.jpg

http://imageshack.com/a/img801/4017/5y0b.jpg

http://imageshack.com/a/img812/3724/idu4.jpg

bump

Got mine in today. Much more of a clean look vs oem imo.

projectors are physically rotated?

That may be the case...if so that's a bummer.

Kinda looks like the photo with high beams on?

[ame="https://www.youtube.com/watch?v=hye_OnwEyTs"]Winjet FRS/BRZ Headlight Cutoff Adjustment - YouTube[/ame]

I don't have a high/lo hid though. I'm 98% sure anyway...the "highbeam" is on but to my knowledge that only controls the led strip in which is definitely not enough output to cause a disturbance like this.

After market hid kit? I would check cause that looks super close to the high beam photo

That raises and lowers the cutoff in which I've done. .this is another problem. See how the right side just falls off? It appears things need to be rotated. . .the left side is a bit better as you can make out from the photo. I've flipped the bulbs two or three times just to be sure It was correct. Yet things didn't change much one way or another.

You don't need a high/low hid kit.. The projector has that built in, high beam function, a flap slides down for it to provide more light.. I can't see the picture, but judging by the comments, it sounds like you have it on high and the flap is down

I'll check it out in the morning then. I was unaware it's been built in. .interesting. Still the cutoff seems odd..till tomorrow though.

Appreciate all the comments guys. Thanks

I wanted one so much until I realized they are made by a Chinese company.
As a Chinese, I have no confidence with stuffs made by any Chinese companies.
Not saying the quality of the product is bad, but the quality check is where things happen. :(

post more pics pleaseeeee

So as an update (sorry about bombing the thread) it turned out the high beam being on was the cause. Yes I'm a fool..did not know these were fitted in such a way. :lol:

Still need to do some adjusting as they are extremely low and unfortunately I didn't take note of the height in which the oem ones were calibrated. But these are some sexy headlights ahah. Love em'

P.s. Does anyone know what the second knob closest to the fender-wells adjust.?

P.p.s. Did some more looking around must be the horizontal adjustment. Ugh I messed with it a bit when I was trying to figure out what was up with my pattern initially. It's such a pain to get to oh well, got to do what you gotta do.

Good shit haha, if you like the look of the drl @fteightysix sells a mod

Dude call us tomorrow - Please snap some photos of your beam pattern - I dont think you got these from us but we are glad to help

Here's chrome on argento. Sorry for the iPhone pictures.

http://img.photobucket.com/albums/v1...ps6bd76b29.jpg

http://img.photobucket.com/albums/v1...ps7b823aa5.jpg

Works well on that color. I'm liking the canards and lip as well. Probably my next purchase. :b

https://lh6.googleusercontent.com/-v...212_173413.jpg
https://lh4.googleusercontent.com/-h...212_170308.jpg

Better shot of mine:

Here is mine!!
from Sema 2013 in the winjet booth

http://i1302.photobucket.com/albums/...ps9dff7a46.jpg


http://i1302.photobucket.com/albums/...ps4f86d17b.jpg

Dude I see you around all the time. I have the blacked out fr-s with red rails and TRD spoiler/bumper