10 series fog light help
 

Is anyone know where to tap the positive switch wire for the fog light on the 10 series inside the driver side cabin?

Don't want to tap into the low beams? You can add an add-a-circuit to the fuse box if you mean the power wire from the switch. As far as switched power sources from the stereo I am not sure

Sent from my SAMSUNG-SM-N900A using Tapatalk

If you have a multimere just start testing wires in that area. The important thing is to tap it to an acc wire so that it not constantly drawing power. I need to do mine this weekend prob and will let you knkw what wire I tap, should be able to use the same one in that area of the dash at least.

Let me know, I have the push start ignition and I was follow the thread where they tap into the Green/Yellow Ignition wire but when I open up the side panel on the drive side for my car. I did not have that wire so I am stuck. I was wonder is it the wire required a 12V?

Easiest way. Use one of these and tap into the fuse box. Acc or lights of course.Attachment 60439

When you tap this way, when engine turn off is the line still have power?


Sent from my iPhone using Tapatalk

Only if you tap in to a fuse that has power all the time. Just choose one that doesn't.

Do u have one for sale


Sent from my iPhone using Tapatalk

Unfortunately I only have the one for the full size fuses. You might try one the higher end stereo shops. Or search under "fuse tap" on eBay. Etc.

I just went to pep boys and pickup one


Sent from my iPhone using Tapatalk

Cool, I didn't know they carried it there.

Finish wiring tap into lighter wire look awesome


Sent from my iPhone using Tapatalk

Attachment 60910

Here is how it look


Sent from my iPhone using Tapatalk

looks really good Qui. can you still turn on the halos separate from the fogs or only all them at once?