Winjet HID Size?
 

Hi,
Recently I purchased the new Winjet Headlights for my FRS (Still being shipped). I got excited and jumped the gun by ordering a new hid kit. I ordered the standard H11 size HID's and just found out that winjet headlights use H7 bulbs? Can someone Confirm that it uses the H7 and not the standard H11? And if it does use H7 bulbs, Are they just normal H7 single beam HID's or do I have to get the Bi-Xenon HID's.


Thanks in advance to everyone that can help me out with this information!

Found my solution...now how to delete this post? sorry I'm new to this.

You should post the answer and leave the thread so anyone else with the same question can find it.

What he said^

This has been covered in another thread. Anyway to reiterate:


The H11 would work, but you have to make sure it sits correctly inside the housing. Its a lot easier to just go and buy a replacement H7 bulb from ebay or where ever. Just be sure to buy a bulb that's compatible with your ballast, that way you can keep your old ballast.

If it doesn't sit right in the housing, the output will be off and dim.

Thanks for the response everyone. The answer is yes it uses H7 single beam bulbs and no longer uses the standard H11 bulbs.

Thanks for the reply! I was looking for this answer :D

Is it H7 35W or 55W?
The headlights are stamped H7 55W...

Can anyone show me the link to where they show that you can fit h11 in this head lights thanks

Sent from my LG-D950 using Tapatalk

Up to you, most people just get 35W to be safe.