Got it all taken care of guys. if anyone is doing this conversion and has questions let me know I'll be happy to answer them. thanks again for the help!

Thinking about picking up a set of winjets. I currently run an morimoto hid kit. How'd you end up wiring your hid's?

All you need to do is take the low beam part of your oem headlight harness off and put it in place of the low beam harness of the winjets. Removing and replacing the pins from the connector is pretty easy, just pull the white insert thingy out and depress the tab for each wire you want to remove and pull it out

Just installed my HIDs to the Winjets. No problems at all. Only thing is the wire for my H7 bulbs is really short so I had to relocate the ballast.

Pic of lights on

Got any pics of the cutoff? Hows the output/beam pattern compared to stock and HID kits in the stock housing?

Check out our thread on how we wired up the morimoto kits -

http://www.ft86club.com/forums/showthread.php?t=52206

http://www.fteightysix.com/pages/win...formation.html

The image you guys have makes sense for the headlight to the ballast. But what changes did you guys make to the wiring behind the dust cap/cover. Do you guys have any pictures of that? Thanks!

Ill post images in our GB thread

thanks, appreciate it!

Hello i just ordered the winjet headlights did youuse a H7 hid kit ?

Had no idea the H7 bulb just pops off... lol. Until I watched this diy vid [ame="https://www.youtube.com/watch?v=EV4x5MH01k0"]Diode Dynamics HID install on Winjet/Spyder Headlights - Scion FRS and Subaru BRZ - YouTube[/ame]

im having problems with this at first i thought it was the headlight , my right drl works but my left dosent , got headlights replaced and same problem drivers side drl is not working . i also have DD HID KIT

We're you able to ever get this resolved? I'm currently having this issue too.