Please post your Aftermarket Seats
 

doing a bit of research.. I am trying to figure out what seat brackets to buy for my Corbeau FX1 Seat .. I had some custom ones made that used the stock sliders but the seat was offset to the left about 3inches.. and they sat funny..

Please post you setup and what you did for the seat brackets.. Side mount or Bottom Mount .. Thanks in advance

Mine for reference:

https://scontent-a-ord.xx.fbcdn.net/...12545332_n.jpg

https://scontent-a-ord.xx.fbcdn.net/...56620614_n.jpg

Thanks

Bill

Recaro profi spg and rails are nagisa. The seat centered and no play worth rails.

http://i509.photobucket.com/albums/s...ps12cbc53d.jpg

^^^ How narrow is the seat.. ??? and does it slide the whole range??

TIA

Bill

The rails go all the way to the back and the seat can basically be put to the floor. The seat very supportive narrow waist with wide shoulder support. but not a great seat when you are married, because it remind you of marriage weight you gain.

http://www.evasivemotorsports.com/mm...ze_425x312.jpg

^^^ yeah 15.5 inches is pretty dang narrow.. For reference the FX1wide is 22 inches.. and a FX1 is 19inchs.. and a FX1 pro is 17inches..

http://www.corbeau.com/product_image.../fx1-pro-l.gif
http://treperformance.com/images/F28650532.gif


http://www.corbeau.com/product_image...loth/fx1-l.gif

Attachment 60068

Buddy Club P1 with buddy club side rails


Sent from my iPhone using Tapatalk

rs-g super stark, weights 4.5 kg, sorry for the phone picture.

^^^ what brackets are you using.. please..

I use these rails
http://apps.recaro-automotive.jp/bfm...9&cye=infinity

and these adapters
http://www.club.recaro-automotive.jp...eparts/adaptor

good thread, i wanna see mooore

Can somebody put up a photo of where they mounted their anti submarine belt.


Sent from my iPhone using Tapatalk

Not quite aftermarket, but this was done for headroom. The sculpted part of seat base sits on the floor. Airbags are swapped over. oem rails on the seat were stripped of all rx8 mounting points then bolted through to the iron strips. Was able to line up factory floor hole with the seat rail hole in the back right (seatbelt) corner.

http://farm8.staticflickr.com/7443/9...7263abc8_c.jpg

http://farm8.staticflickr.com/7355/9...1fd7ba24_c.jpg

Here are mine, out of a Evo X. Using planted seat bases and custom fabricated to fit.

http://www.jadecrew.com/wp-content/g...oject86-03.jpg

http://www.jadecrew.com/custom-recar...seats-in-fr-s/

I may have to steal this idea from you


Sent from my iPhone using Tapatalk