Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Greddy Evo 3 Front Pipe Connection Pic Request (https://www.ft86club.com/forums/showthread.php?t=53344)

mad_sb 12-11-2013 08:53 PM
Greddy Evo 3 Front Pipe Connection Pic Request
 
Anyone got a picture of the front pipe end of an Evo3 midpipe? Looking to see:
  • what the flange looks like
  • will mate up with a 2.75" Frontpipe designed for no doughnut gasket
  • does it neck down at the flange or is it true 2.75"

GodDamage 12-11-2013 08:57 PM
If I remember my install, which was over 6 months ago, the pipe did not slim down at the flange.

mad_sb 12-11-2013 09:03 PM
Do you recall if it used the stock gasket and spring bolts or a regular flat gasket and regular bolts?

GodDamage 12-11-2013 09:22 PM
Quote:
Originally Posted by mad_sb (Post 1384502)
Do you recall if it used the stock gasket and spring bolts or a regular flat gasket and regular bolts?
It came with a new gasket and bolts, but it bolted up just fine to a stock frontpipe, so I think as long as the gasket you want to use is designed to bolt up to oem, you should be fine

mad_sb 12-12-2013 09:47 AM
Quote:
Originally Posted by GodDamage (Post 1384541)
It came with a new gasket and bolts, but it bolted up just fine to a stock frontpipe, so I think as long as the gasket you want to use is designed to bolt up to oem, you should be fine
That's just it, none of my front pipes (except the stock one) use the oem gasket anymore. I have modified everything to use regular flat gaskets. Thinking about converting to the ultimate racing 2.75 front and over pipe and want to make sure the Evo3 will bolt up to a flat face flange without any fitment issues :cheers:

SmsAlSuwaidi 12-12-2013 09:53 AM
I had an issue with my Buddy Club Spec II and J2 front pipe, the buddy club had curves ( for the donut gasket and the j2 was flat a regular flange/gasket , i tried everything, but i would always have a slight leak ( flutter until it warms up)

rhythmM 12-12-2013 10:03 AM
I just bought the greddy evo 3 and ultimate racing over front pipe combo during Black Friday! They are both sitting in my room now. I can take a picture of the flang for you later tonight like 10pm PST.

Gonna install this coming up weekend super stoked about it!

Magna 12-12-2013 10:23 PM
Quote:
Originally Posted by rhythmM (Post 1385438)
I just bought the greddy evo 3 and ultimate racing over front pipe combo during Black Friday! They are both sitting in my room now. I can take a picture of the flang for you later tonight like 10pm PST.

Gonna install this coming up weekend super stoked about it!
I was thinking of that same setup let us know how it sounds.
Are you going with stock header?
What option did you go with on the front pipe (straight, Ressonated, Ceramic or metal CAT)
Thanks

King Tut 12-13-2013 12:11 PM
Quote:
Originally Posted by mad_sb (Post 1385411)
Thinking about converting to the ultimate racing 2.75 front and over pipe and want to make sure the Evo3 will bolt up to a flat face flange without any fitment issues :cheers:
It will.

Eazy-V 05-17-2017 04:29 AM
Sorry to restart an old thread, but this is exactly what I'm inquiring about.

I know the EVO3 fits the OEM front pipe and wanted to get a bigger frontpipe, so does the frontpipe need to have OEM donut flange to fit the EVO3 or will flat flange work too?

Eazy-V 05-24-2017 10:41 PM
I went with the JDL ultra quiet catted 3" front pipe with flat flange, hope itvfirs the Greddy EVO3


All times are GMT -4. The time now is 07:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.