Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Northwest (https://www.ft86club.com/forums/forumdisplay.php?f=16)
-   -   Anyone have unresonated mid pipe I can try? (https://www.ft86club.com/forums/showthread.php?t=53075)

stockysnail 12-08-2013 02:09 PM

Anyone have unresonated mid pipe I can try?
 
I've been curious to know what my car would sound like with an unresonated mid pipe for a while now but I don't want to cut up my existing one just in case I don't like it. Does anyone have an unresonated mid pipe I can try out? Perhaps @Jason@Nameless?

stockysnail 12-08-2013 02:13 PM

Or is someone wants to sell me their stock midpipe for cheap I'll have someone cut the resonator out, then I'll have both res and non-res.

Chen 12-08-2013 02:51 PM

I have a Perrin unres. Front pipe if you want to take it off and then put it back on.

thehapaone 12-08-2013 04:34 PM

My car has a nameless unresonated on it I can swap with you for a week or something

NickFRS 12-08-2013 05:30 PM

Quote:

Originally Posted by stockysnail (Post 1376572)
Or is someone wants to sell me their stock midpipe for cheap I'll have someone cut the resonator out, then I'll have both res and non-res.

My cousin can mutilate your stock one. if you want you can throw mine in a sec before i install it to see the sound diff.

tech4pdx 12-08-2013 06:43 PM

I have a practically brand new resonated 2.5" mid pipe you can buy/use/whatever. Let me know.

NickFRS 12-08-2013 09:25 PM

Quote:

Originally Posted by tech4pdx (Post 1376915)
I have a practically brand new resonated 2.5" mid pipe you can buy/use/whatever. Let me know.

What are you doing this time to your car!!! ahahaha :confused0068:

ramiram1984 12-08-2013 10:52 PM

I bought one from Perrin.

stockysnail 12-09-2013 01:06 AM

Quote:

Originally Posted by tech4pdx (Post 1376915)
I have a practically brand new resonated 2.5" mid pipe you can buy/use/whatever. Let me know.

How much?

stockysnail 12-09-2013 01:07 AM

Quote:

Originally Posted by NickFRS (Post 1376812)
My cousin can mutilate your stock one. if you want you can throw mine in a sec before i install it to see the sound diff.

Is yours unresonated? If so I'd like to try it out. Otherwise I'll have your cousin take out the resonator if I buy Evan's mid pipe.

stockysnail 12-09-2013 01:08 AM

I was thinking about calling Perrin and seeing how much they'd sell just the mid pipe to me for. I have a feeling I'll get more snap crackle pop without the resonator. Hopefully not too much louder however.

tech4pdx 12-09-2013 02:13 AM

Quote:

Originally Posted by stockysnail (Post 1377552)
How much?

This is the midpipe sold by Works, FYI. It retails for $350-ish or something like that. I'll let it go for $200 since it was only mounted once and taken off the same day. It is wrapped up just like I received it. It is resonated and I highly recommend you keep that. Let me know.

stockysnail 12-09-2013 04:03 AM

Quote:

Originally Posted by tech4pdx (Post 1377666)
This is the midpipe sold by Works, FYI. It retails for $350-ish or something like that. I'll let it go for $200 since it was only mounted once and taken off the same day. It is wrapped up just like I received it. It is resonated and I highly recommend you keep that. Let me know.

I was looking for a stock midpipe I could cut the resonator out of. I would hate to cut this nice one up. If it was an unresonated one then I'd say I'd like to throw it on to try it but it's not. :(

Chen 12-09-2013 04:06 AM

My bad josh, I ment I have a PERRIN mid pipe,

John92 12-09-2013 12:33 PM

Does anyone have a 3" perrin unresonated midpipe I can try ?

stockysnail 12-09-2013 08:40 PM

Quote:

Originally Posted by John92 (Post 1378232)
Does anyone have a 3" perrin unresonated midpipe I can try ?

Perrin does. I just talked to them. They said the Perrin midpipe won't work with the stock setup because of the vband clamp, but obviously will with other Perrin stuff.

stockysnail 12-09-2013 08:42 PM

Quote:

Originally Posted by NickFRS (Post 1376812)
My cousin can mutilate your stock one. if you want you can throw mine in a sec before i install it to see the sound diff.

Nick when can I get your unresonated from you to try for a day?

John92 12-09-2013 09:53 PM

Quote:

Originally Posted by stockysnail (Post 1379456)
Perrin does. I just talked to them. They said the Perrin midpipe won't work with the stock setup because of the vband clamp, but obviously will with other Perrin stuff.

I have a full 3" setup with headers but i am currently resonated and would like to hear an unresonated.

stockysnail 12-11-2013 06:31 PM

@peace_noel was generous and gave me his old stock mid pipe with resonator so I'm asking @NickFRS to ask his cousin if he can drop it off. Should be an interesting experiment having both resonated and unresonated to swap between to hear the difference! :)

NickFRS 12-11-2013 07:25 PM

Quote:

Originally Posted by stockysnail (Post 1384126)
@peace_noel was generous and gave me his old stock mid pipe with resonator so I'm asking @NickFRS to ask his cousin if he can drop it off. Should be an interesting experiment having both resonated and unresonated to swap between to hear the difference! :)

Txt u his info.


All times are GMT -4. The time now is 04:22 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.