30mm wide fenders and 18x10 +44
 

just wondering if they would look too tucked or funny running a 18x10 +44 with a 30mm wide front fender. trying to avoid spacers as much as possible and rather not change wheel so just feeling it out. if it's going to look icky, no go!any input?

With close to no camber, It should be about spot on. Anything more than like -2 though and you'll probably have a bit of gap

I believe I have -1.8 f and -1.3 rear now. Hmmmm tough one.


Sent from my iPhone using Tapatalk