DIY request how to remove stock fr-s rubber exhaust hangers?
 

How do I remove them? People say its easy but it seems kinda hard . Maybe im not doin it right...

It's an art. You need to wiggle the shit out of them to get them to come off. Just go side to side for awhile until they come off.

Don't pull too much. A little WD-40 wouldn't hurt, but then remember that it will be slick to hold on to.

i spray a bit of w-d in em, wriggle em back and forth to let it penetratre, then go in with a thin flat head screwdriver, and use it to pry the outside edge of the hanger off the mount, and viola... 15 seconds = done