Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

- Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)

- - Toyota OEM 4.5 FD Part number (https://www.ft86club.com/forums/showthread.php?t=52316)

Toyota OEM 4.5 FD Part number

Not sure if this has been posted before or not, but in case it hasn't, or been missed, here is the Toyota partnumber for a 4.556 Final Drive to fit our cars.

FWIW, Cusco (and others) buy these from Toyota, repackage, and double the price. Typical price I've seen for the Cusco is $1200USD. I got this baby for around $650 NZD. (~$500 USD) :D

http://i13.photobucket.com/albums/a2...ps54eb032e.jpg

Does that include everything? All the shims and such?

Quote:

Originally Posted by industrial (Post 1357526)

Does that include everything? All the shims and such?

Here's everything that came in the box...

http://i13.photobucket.com/albums/a2...ps396f112f.jpg

http://i13.photobucket.com/albums/a2...psb5131535.jpg

Quote:

Originally Posted by diss7 (Post 1357281)

where did you get them from?

Nick at North Shore Toyota. They do all the trd parts as well. Sell a fair bit into Aus as well I believe.

Nick@nst.co.nz

Quote:

Originally Posted by diss7 (Post 1358171)

Nick at North Shore Toyota. They do all the trd parts as well. Sell a fair bit into Aus as well I believe.

Nick@nst.co.nz

Cheers for the info, 4.556 FD is compatible with the stock LSD?

Quote:

Originally Posted by nabe (Post 1358194)

Cheers for the info, 4.556 FD is compatible with the stock LSD?

Yes.

lol at Macbook running Windows.

Just like the 86 running a Subaru engine.

You are a TRUE TWIN DRIVER GOOD SIR.

What is the final drive ratio of these cars stock?

Quote:

Originally Posted by Captain Insano (Post 1359133)

4.10 FD OEM

Thanks. I wonder what top speed this FD ends up limiting us to.

I know RCE posted a review on their Cusco FD and said it really made a difference.

I am still debating on a 4.5 or a 4.7.

Quote:

Originally Posted by mfbmike (Post 1359148)

Thanks. I wonder what top speed this FD ends up limiting us to.

I know RCE posted a review on their Cusco FD and said it really made a difference.

I think with the 4.1 we are limited to 168ish, which is fine if you have a turbo or something that will give the power to reach that speed but with only 200hp we will never reach it.

With the 4.5 we should be looking at 143ish I think was the number. Unless you are going FI, then this is a great idea to make the car faster and allow for greater access to the performance while driving!

Quote:

Originally Posted by IAmNotTheDriftKing (Post 1359208)

Even with FI, I think this would still be a very worthwhile mod.

Realistically, even with FI, how many people are getting up to top speed in these cars? And if you're doing that on public roads, :slap:.

My wonder is with the added performance in lower gears with the FD with FI, would other parts of the car become a weak link i.e. axles? I suppose MPG's would take a hit as well but I don't think anyone changing out their FD is worried about gas mileage.

I'd really like to see a forced induction setup running this final drive kit. Acceleration must be :eyebulge:

The fact that it's an OEM part makes it all the sweeter in my opinion.