Greddy PRofec OLED
 

hey guys I've got the greedy t518z turbo kit , and just got the greedy OLED ebc. was wondering if anyone else has got this EBC and how did they plumb it.

Probably as per the instructions?

This guy. I miss Unicorn and all his polite responses. Since you have an internally wastegated turbo, follow the instructions for that method. You will have to hook up the solenoid inline with the boost reference going to your wastegate.

where would i tap in for the boost sensor king tut ? Btw ur awesome mate :D

I would run a vacuum manifold off the brake booster hose on the back of the intake manifold and hook the boost sensor up to that. Here is a picture of my vacuum manifold and boost solenoid. That smaller hose is the one going to my EBC:

http://brz.ridedomain.com/vacuum_manifold.jpg

Whats a Fas turbo?

:D

A Garrett obviously.

Now we dont have either or....

Well that sucks. What was his final demise?

I tried looking back at his posts but whatever was his demise was deleted and I believe it was in this thread because I had also responded to his kindness (nothing bad, something like "so sweet") and that was deleted too.

I believe he also posted something harsher than usual in the "Plotting....." thread.

Wouldn't have happened on my watch. :paddle:

I got it running mate ta :)
still playing around with the boost configuration , around what psi would u recommend for my setup

Greddy T518z turbo kit/Greddy High flow Cat fine tuned on turbo installation
Amuse power house R1000 titanium straight pipe
Greddy CS GTS ver 2 Limited edition catback
+ Greddy Profec OLED EBC
haven't got it fine tuned since the turbo and cat got fitted, do you think its necessary ?

I would do exactly what R/T Tuning did and run 14 psi:

http://www.ft86club.com/forums/showp...3&postcount=32

http://www.ft86club.com/forums/attac...8&d=1381842273

I have been away in Kenya on business, only to get back and find my favorite poster banned now in both his guises! What is happening to this world of ours? :cry: :cry: :cry: