So I received in a package from Japan today...
 

and this was inside:

http://vracer111.smugmug.com/photos/...-JhPHJXD-M.jpg

http://vracer111.smugmug.com/photos/...-zjZLhtt-S.jpg

http://vracer111.smugmug.com/photos/...-H4SDsJv-S.jpg

If you don't know by now, shot 1

If you don't know by now, shot 2

If you don't know by now, shot 3

Will be painting them a satin black to not stand out so much with my Asphalt FRS....

Nice. I have the carbon ones on their way. Weird how the painted ones only seem to come in white, red or black.

Where did you order these from? I've been looking for them but haven't had any luck finding them on japanparts

I wanted the carbon fiber ones...but couldn't justify the price. I'm excited to get rid of the stock FRS fender vents which I never cared for.

Was wondering what the unpainted natural color would be on these and turns out it's a scale model type ABS gray....

Ordered from Japanparts:

http://www.japanparts.com/db/partsli...EY=460-006-514

Well I feel kind of dumb now haha. Thanks!

The price ins't too bad for paint matched

Any update on the finished product?

I've been busy with family and such since November and waiting on being able to be off work since it's dark by the time I leave, but I actually painted it 2 days ago (~ 5 coats of satin black + 3 light clear coat layers) and am waiting a few more days to install it. Should have it on next week. I just took a picture of the paint job, will post it up in a little bit.


And here's the picture:

http://vracer111.smugmug.com/photos/...KQMtDpd-XL.png

Nice, can't wait to see the installed pics!

In for installed pictures.

Just wondering, how secure it is after installed? can it be pull off ?

my TRD tag was pulled off from my front spolier and some attemps on my clear side markers... I am really worry on these parts...

And the TRD fender vents are installed...pardon my dirty car.

First two pictures are after the stock ones were removed...

http://vracer111.smugmug.com/photos/...-XxRDRNB-L.jpg

http://vracer111.smugmug.com/photos/...-VFPzW86-L.jpg

Cleaned up the area where the vents go, got most of the adhesive off and area dried and installed the TRD ones on both sides. Then did 2 layers of wax on the vents. The rest of the pictures are the TRD ones installed...

http://vracer111.smugmug.com/photos/...Mdpszcb-XL.jpg

http://vracer111.smugmug.com/photos/...VJdsWSn-XL.jpg

http://vracer111.smugmug.com/photos/...WgQnJM3-XL.jpg

http://vracer111.smugmug.com/photos/...Sdvs7rZ-XL.jpg

http://vracer111.smugmug.com/photos/...SF5cMM5-XL.jpg

http://vracer111.smugmug.com/photos/...KDpXLjp-XL.jpg

Stock fender "vents" are pretty easy to pull off...I think these will be a little harder though due to how the adhesive strips run horizontally top and bottom at the rear and there is actually an adhesive pad at the front where OEM doesn't have one.

looks good buddy!