JDL Auto Design UEL Turbo Manifold
 

We've been doing a TON of UEL NA headers and i have to admit the sound has really grown on me...I've been working on this setup and its just about finished up. (still needs to be ported and surfaced)

JDL UEL Manifold
V-band up pipe
3" downpipe
full 3" overpipe

http://jdlautodesign.net/wp-content/...-Turbo-Kit.jpg
http://jdlautodesign.net/wp-content/...urbo-Kit_1.jpg
http://jdlautodesign.net/wp-content/...urbo-Kit_2.jpg

Full 3" overpipe? Im tuned in.

Yes we just released out Turbo Over Pipe

http://jdlautodesign.net/shop/ft86-turbo-over-pipe/

Thanks guys. Now I cant get up from my office chair.

"Theres no room for a 3" overpipe " lol

I have their 2.5" overpipe, and I had to work to get the proper clearance over the subframe. I don't think I would want to try and do that with .25" less clearance.

If you have any clearance issues we can swap it out for you. We changed the design when we revised them for RHD and LDH.

No clearance issues, and I didn't have to modify anything just make sure the downpipe/overpipe and overpipe/midpipe connections were tightened down at the correct angle.

I would suggest aftermarket mounts to anyone that wants a 3" anyways..

I agree. I am still on the stock mounts and your 2.5" overpipe has never made contact with anything. :thumbup:

I'm sold :).....

Edit: would this be sold as a kit or we should source the rest ?

Fuuuuuu!


Edit: im dumb.

Twin scroll and uel seems pointless to me. Kinda defeats the purpose.

And now we all know why i dont make exhuast manifolds ahaha. Learn something new everyday tho.

They like that "term"