Originally Posted by Turbo Den (Post 1315816)

which tune can hold the redline, instead of bouncing back like stock, or drop off from a cliff like my ecutek now.

I want the tune can hold the redline for two seconds max.

Thanks

Originally Posted by Shit Luck (Post 1225894)

rev limiter- would like the car to stay on it so to speak for sliding.

Originally Posted by shiv@vishnu

Rev Limit: There are two rev limits, A and B.
You can find them by going to the Limit category. Keep both Rev Limit A and B set to the same values.
In each parameter, there are two values.
The bigger (first) value on defines the RPM at which ignition is cut.
The smaller (second) value defines when ignition comes back on.
The default map has a 150RPM difference between the two values.
This softens the rev limit a bit (the stock difference is 250-300rpm IIRC).
You can soften the limit more by raising the lower value close to the value of the upper value.
So using 7600 and 7550 will be pretty soft feeling!

Shiv

Originally Posted by moto-mike (Post 1323895)

Not quite that easy ;)

It is one thing to set a lower hysteresis, yet another to do what we do. The lower hysteresis bounces the cam chain to death and rattles the pistons off the wrist pins, while ours is buttery smooth like a dirt bike rev limit. We use custom mapping to do this via RaceROM, and it is switchable with maps. Won't do that with anything else.