Differences between the 00 and 01 Roms
 

Looking through the various roms I found a few differences. Some were mentioned in other posts before. If you know of specific differences post them here. Ill start with what I know, keep in mind my rom is 01J compared to 00C:

1. Air/Coolant/O2/MAF/OIL all rescaled
2. Knock sensor rescaled and also values changed
3. Cat heat table now populated
4. Closed loop AFR changes in low rpm/low load
5. Manifold Pressure Sensor limits raised so check engine doesn't come on at higher airflows
6. Requested torque changed a bit in higher rpms
7. Transient retard rpm threshold raised from 5000 to 10000 (700 roms had a -5rpm value)
8. Transient retard table populated at high rpm / low load