|
Quote:
TRD: INTERIOR BOOTS SET : MS393-1800* http://www.japanparts.com/db/partsli...aker=6&VOLKEY= |
4 Attachment(s)
I cant believe that so many people have updated the radio and passenger side dash panel, and yet Ive only seen 2 others do the gauge surround. Which in my opinion is the worst looking piece of the interior. So ill submit my pictures, maybe motivate some of you. I did it all myself, Im a tech by trade, so Im not the best with paint. So id say its about 90% good haha. I chose a dark metallic gray. It was just a touch up spray can from Canadian Tire. Dont recall the actual name, but it was at least a Toyota colour.
Oh and also, my Raceseng r-lock and shift knob. |
Quote:
|
2 Attachment(s)
Thought id post a couple shots of my interior as a few things have been updated...
Attachment 73590 Attachment 73589 Sent from my iPhone using Tapatalk |
Quote:
I have one from my previous car and idk if to sell or to install.. |
Quote:
See my signature for the DIY (all the details)...If it's anything like my model - install it! Huge improvement over stock |
3 Attachment(s)
|
Quote:
|
Quote:
The badge was for sale on the forum about half a year ago. I have one also. |
Superkenny86: Where did you get that domo-kun from? I'd like to get one.
|
Quote:
|
Quote:
|
1 Attachment(s)
Quote:
Attachment 117418 |
|
2 Attachment(s)
|
https://farm6.staticflickr.com/5631/...ccef4c06_b.jpgIMG_4337 by Matt Raves, on Flickr
This, gauges, and shift knob are all I've done inside so far... |
|
|
1 Attachment(s)
Here is a current picture of my interior. Sparco deep dish wheel with NRG quick release and splash short hub adapter. HKS limited edition shift knob. Defi gauges with triple gauge dash pod wrapped in white carbon fiber vinyl. Its a work in progress but I like where its going. Next is a Recaro seat and a Takata harness setup.
|
Quote:
|
Quote:
|
Quote:
|
Just gonna blow the cobwebs off this thread with this...http://uploads.tapatalk-cdn.com/2016...93763cdb48.jpg
Sent from my iPhone using Tapatalk |
Quote:
|
Just started at 11 last night did one piece but will be wrapping the rest tonight and will post more pics later I went with Avery Dennison ColorFlow vinyl wrap material and the color is called Rising Sun http://uploads.tapatalk-cdn.com/2016...a219fb4ced.jpg
Sent from my iPhone using Tapatalk |
Another pic of the new vinyl http://uploads.tapatalk-cdn.com/2016...0152a78612.jpg
Sent from my iPhone using Tapatalk |
Here's my interior.
[IMG]http://i1082.photobucket.com/albums/...psknccvvpn.jpg[/IMG] [IMG]http://i1082.photobucket.com/albums/...psbbawrito.jpg[/IMG] |
Quote:
|
|
Dang that shifter is SHORT!
|
|
|
- Beatrush shift knob
- OEM black AC vent trim, shifter ring thing, traction buttons - Glowshift oil pressure gauge - Knockoff Spigen magnetic phone mount https://i.imgur.com/p096Fou.jpg |
Quote:
Quote:
|
Quote:
|
Quote:
Yup, mine is AT. Still not sure why it's confusing how it would be difficult to go in reverse though? |
Quote:
|
Looks like this thread has been dead for a bit, but here's mine:
Got some new bits in, this is mid-install- https://scontent-nrt1-1.xx.fbcdn.net...94&oe=5B3C88E5 Finished install (for now) https://scontent-nrt1-1.xx.fbcdn.net...d6&oe=5B7076DB I'd like to replace this panel with either CF or piano black- https://scontent-nrt1-1.xx.fbcdn.net...96&oe=5B735393 https://scontent-nrt1-1.xx.fbcdn.net...f1&oe=5B7224B8 Swapped in these in place of the stock courtesy lights- https://scontent-nrt1-1.xx.fbcdn.net...1b&oe=5B39C82A Still have a couple more pieces I'd like to swap out soon. A/C panel, door window switch trim, maybe shifter trim. |
Factory red leather
TRD start button TOM's shift knob KARO floor mats https://i.imgur.com/1jVFy65h.jpg |
| All times are GMT -4. The time now is 11:48 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.