Why I support CSG... Thanks for the RT700!!!

https://farm8.staticflickr.com/7665/...5f90cc3c_z.jpgIMG_20150506_222023 by zdr93523, on Flickr

Woah, you have some serious pads and fluid there...

I'm getting ready for NASA Utah Round 3. I have to keep @enivid at bay haha. I have some new 235/40R17 Maxxis RC-1s on the way too.

Please punk Tyler...Mr. ABP S2000 CR #172 for us too. ;)

Consider it handled! Is there a contingency award for posting the official results? :thumbup:

FWIW, I believe our entire field of TTB cars and drivers are CSG supporters... Tyler, Mike, Andy, (I think David is), and myself. 3 86s and 2 S2000s. The other S2000 driver is feeling the pressure. He's stepping up to a Stoptech BBK and some kind of +12 point slicks.

Wait this is where Ira's CR went?

That's pretty encouraging. More mods doesn't necessarily make people go faster. ;)

Yea. Tyler is the new owner and he has had the honor to stretch #172's legs. :D

You guys sells any Suburban parts? ;)

Love racing with Tyler. Cool dude for sure.
Attachment 109026

I'd like to send a big thank you to CSG and CSG-David for getting me set up with some Winmax W5 pads prior to my first track weekend. I am 100% sure that I would not have had the same experience with two days at NOLA on stock pads. All four pads came in on time, and the recommendations were solid. I was hesitant to put such aggressive pads on a stock car on stock tires, but after two hard track days I am really, really happy I did.

Thanks again guys, I will definitely look to you in the future for both advice and go fast(er) mods!!

Dustin

Another fantastic experience dealing with CSG! They delivered this to me hassle free:

ACE Header and Front Pipe.


https://scontent-sjc2-1.xx.fbcdn.net...g=eyJpIjoidCJ9

https://scontent-sjc2-1.xx.fbcdn.net...g=eyJpIjoidCJ9

https://scontent-sjc2-1.xx.fbcdn.net...g=eyJpIjoidCJ9

See you guys at the track!

Couldn't be happier with the service. Got my Jackson SC CARB kit in the time frame promised. Needed a little help during my self install and they were very helpful and responsive both on the phone (on the 3rd of July) and via email.

Competitive pricing and great service, you can't go wrong.

Glad you able to get everything squared away on Friday and even over the weekend! :thumbup:

Ordered a set of Spoon front offset ball joints for my S2k from @CSG Mike through this forum and he's been extremely helpful and responsive throughout the process.

Parts took a while to receive (almost 2.5 months) primarily due there being no stock at all. Payment was easy and Mike kept me informed of the status or got back to me within 24-48 hours of a PM.

Parts looked great and brand new and was packaged well.

Would highly recommend and buy again (assuming the Cdn dollar goes back up)!

Two thumbs up!

Frost