WORK Meister S1 17x9 +18/ 18x10 +5 5x114.3
 

I am parting out my 240 and i figured i'd give this a shot over here since some guys change hubs to 5x114.3. I have rep on Zilvia Adam496 (not 498 i made a mistake signing up here). I'm willing to drive to meet up or i can ship. I'll accept cash or paypal (i am verified). Feel free to email me at adamhowell331 at gmail.com or pm me.

The wheels have recently been powder coated matte gray. The lips and faces are nearly perfect. One of the 18s has a small scrape which is barely noticeable. The rear inside lips have rash (i guess? ill call it that) from rubbing on my coils when i ran more camber. One center bore on one wheel has a chip in the coating as pictured

17x9 +18 (+8 with 10mm spacer) - 215/45 yoko sdrives 70%
18x10 +5 235/40 general exclaim 20%

$2100 + shipping obo

http://oi45.tinypic.com/2zgwab5.jpg.http://i47.tinypic.com/fn6ctz.jpg

nick on the lip rear wheel

http://i43.tinypic.com/5b4br5.jpg
Chip in powder coat by hub bore - front wheel

http://i44.tinypic.com/25fk3gj.jpg

Where it rubbed the coil/body -rear wheel
http://i41.tinypic.com/aylnhw.jpg

if only they were 5x100...