FA20Club Dyno Day @ Phastek Performance (Houston, TX)
 

http://fa20club.com/wordpress/wp-con...a20%20logo.jpg

Toni from FA20Club is tentatively scheduled to visit Houston, TX on November 30, 2013. This is your opportunity to take full advantage of their services in an environment in which they can cater to your specific setup.

For more information, please feel free to contact me.

AIM chris AT phastekperformance.com
Yahoo bajacruiser07
ICQ 3353938 <-- just kidding... Don't use that anymore.
Email chris AT phastek.com
Phone 713-849-0555 (ask for Chris)
Forum PM

Phastek Location

http://i805.photobucket.com/albums/y...pscb3b7fdf.jpg

Suite 102 is our main office. Lifts and dyno are across the street. If you decide to stop by, please visit 102.

Pricing

Below is the tentative pricing structure. Of course, you would need an Ecutek license. Donor cables will be available so that you are not required to purchase a cable at the time of tuning.

Pricing Structure - add base price to every job. These prices are broken down into a few categories. One is if you are getting your first tune from FA20Club. The next is NA or Forced Induction. Pricing is based on the amount of people participating in the event (ie 10 below, 10-22, and 12+). If you need an Ecutek license please factor in ~ $300. Donor cables will be available if you do not want to purchase one.

New Tune NA

10 below
Base Price - $110
Tune - $300
e85 - $100

10-11
Base Price - $110
Tune - $250
e85 - $85

12 above
Base Price - $85
Tune - $250
e85 - $85

Existing Tune NA

10 below
Base Price - $110
Tune - $150
e85 - $100

10-11
Base Price - $110
Tune - $100
e85 - $85

12 above
Base Price - $85
Tune - $250
e85 - $85

New Tune FI

10 below
Base Price - $110
Tune - $400
e85 - $100

10-11
Base Price - $110
Tune - $350
e85 - $85

12 above
Base Price - $85
Tune - $350
e85 - $85

Existing Tune FI

10 below
Base Price - $110
Tune - $150
e85 - $100

10-11
Base Price - $110
Tune - $100
e85 - $85

12 above
Base Price - $85
Tune - $100
e85 - $85

Flex Fuel Kit
Regular $650
5+ $600
8+ $575

There is a possibility that this event will extend into additional days.

http://i805.photobucket.com/albums/y...ps413c9bcd.jpg

The List

1. JonnyJames - (New NA/e85 Tune, needs license - using donor cable, needs new Flex Fuel Kit, notified FA20Club)
2. bgibbsunc - (FI, existing e85 tune, notified FA20Club)
3. lickitysplit - (New NA/e85 Tune, needs license - using donor cable, needs new Flex Fuel Kit, notified FA20Club)
4. CK_Bladesmith - contacted for specific requirements.
5. Fr-s fi - (FA20Club w/ Base Tune, has license, existing FI tune, notified FA20Club)
6. Chris'sfrs - (FA20Club w/ Base Tune, has license, existing FI tune, notified FA20Club)
7. Josh - (FA20Club w/ Base Tune, has license, existing FI tune, notified FA20Club)

Tentative

1. zoth

Tentative here as well...I already a tune from someone else, can he still fine tune it? Will the flex fuel kit installed for that price?

They can use a donor cable. If you have a cable it's possible to get it changed to FA20Club.

I'll check on installation prices. Next week I'll ask people to state how committed to are so final pricing can be figured out and invoices issued.

Sent from my LG-E980 using Tapatalk

You mean to say, my cable is married to my current tuner? I was not aware of that if that's the case. :-(

I'm in for this! Only about two hours away near Austin. Hoping I can be ready for a flex fuel kit by then.

It's not a big issue. I know people who have gone from one tuner to another and then back again.

I'll start making a list so we can get closer to locking in pricing. :thumbsup:

I am a definite for this event. If anything changed ill be sure to let you know.

Also do you have any e85 stations in the area?

Nope you can use any tuner on a cable. I have multiple tuner's tunes and swap back and forth at will.

I believe on your tune they just need to update it for the correct dongle ID for Ecutek to be happy. So if you say use their cable instead of yours, your tuner might just have to swap an ID number to flash it

Have a few in the area. The closest is less than half a mile away :w00t:.

Awesome. Thought I might have to bring a few jugs with me. My closest is about a half mile from my shop too. lol :party0030:

I'm almost sold on the flex fuel setup.

3.125" pulley and stock fuel pump / injectors from the other day... (Vortech - 93 oct)

https://scontent-a-dfw.xx.fbcdn.net/...65995124_n.jpg

I know it would be well over 300...

I should have my innovate supercharger and intercooler kit on by the time this dyno day rolls around. Only 2 hours away in Victoria so count me in on this!

:thumbsup: should have some owners looking like :D:bellyroll: