ScanGauge II Xgauge AFR {WORKING}
 

Hey guys. For those with the ScanGauge II that use the Xgauges for things such as oil temp PIDS or custome PIDS, I have been testing the AFR code for a while and have basically deemed it good to go. I wanted to get this out there so you guys can give it a go as well. I know this is a PID that many have been seeking for some time. So you are welcome :thumbsup:

TXD = 07DF0134
RXF = 044145340000
RXD = 2808
MTH = 05B900800000
Name = AFR (or whatever your preference is)

Keep in mind guys that the ScanGauge is limited in refresh rate so this is not to be used as a tuning tool but rather a good quick view of what the AFRs are during daily use. It should not be a replacement to a good quality independent wideband especially since the factory wideband is not accurate below 11.2:1 anyway. This is a great way to see what is happening for the average quick glance or to notice something is not right. I have been datalogging this compared to EcuTek for some time and besides the slower refresh rate it's pretty well dead on.

Hope you enjoy and for anyone who is curious mine is setup for BST, AFR, IAT, and OIL TEMP........................... I want KR (knock retard) so that will be my next project.

I put it in and it seems to be working. Thanks. :) Now I know how rich my car is running! :confused0068:

Good to hear it's working for you :cheers:

sweet thanks!

This is awesome. How's the KR coming? :D
Any luck?

Much apreciated!

Just done, works a treat :w00t:

What's the leanest AFR you should have/see with SC under heavy load ??