Pinche cacaguate!!!!
 

Hello everyone my name is Paul and my cars name is kakawate! Pleasure to be apart of this forum and the gt86/frs/brz community. I own a auto asphalt 2013 scion frs. I have owned the car since August of 2012 and have been just recently modding it out. I really love the cars capabilities and handling puts a huge shit eating grin on my face every time. Kakawate is starting its path down modification and I have already got lots of great ideas from your guys posts.

So far I have 17x9 rota grids on sumitomo rubber and m7 t-titan exhaust catback on the car. But both have made noticeable performance gains. Up next is my m7 panel filter which will be here in days and a intake system from syms or zeek soon after that. I am trying to acquire parts off rakuten.com which is a pain in the bum but its a middleman free source of jdm stuff. Working on a cf sard intake tube and if that falls through I will probably go for a zeek complete intake kit. Anyway thanks for checking this out and I hope I can help contribute any way I can. Gonna try to keep kakawate N/A and be happy right around 250whp but most likely will supercharge

M7 t-titan cat back
Buddy club header (check)
Invidia resonated front pipe (check)
Invidia overpipe (check)
Buddy club racing spec coils (check)
Strut tower bar (coming soon)
Smoked corner reflectors (check)
Project mu pads (coming soon)
Open flash (sold)
Buddy club tails (check)
Zeek carbon intake (for sale)
Buddy club front and rear control arms (check)
Carbon fiber driveshaft (coming soon)
Kraftwerks Supercharger(check)
Aftermarket radiator (coming soon)
Oil cooler kit (coming soon)
Buddy club P1 black bucket seats (check)
Buddy club big brake kit (coming soon)
Toms carbon shift knob (check)
Wideband and guages (coming soon)
Work emotion xd9 18x9
Tanabe wideband (coming soon)
Vented carbon hood (coming soon)
Tommy kaira rear carbon trink lip (coming soon)
New front aftermarket bumper (coming soon)
Thanks, Paul


Ps pics soon to come along with exhaust sound clip!

I like your choice in parts but you won't get anywhere near 250whp. You'd be lucky to get 200. Regardless, looking forward to seeing pics man.

I should be able to squeeze 200 from the parts listed but there will be much more dyno tuning and fabrication as well. Right now I'm sitting at 162whp with 156wtq. Gonna probably do e85 too

Would mind doing an exhaust video of your M7 T-Titanium Catback Exhaust? I'm really considering purchasing it and there aren't enough videos or people owning the exhaust for me to justify spending over 1K on an exhaust. From videos I've seen of the exhaust on the 86's, they sound amazing but I'd like to hear more videos so I'll get a general feel of how the it sounds if I do purchase the exhaust. Another question, how do you like the in cabin noise? Any drone?

I have the video ready just give me 24-48 hours to figure out how to get it on here lol sorry the videos don't do it justice it truly is one great sounding exhaust not to mention the power gains I've shown. To be very clear about the cabin noise is a nice rumble no annoying drone ill try to do a driving video for ya @akahenry

Here's some links of the exhaust sound clips.

[ame]http://youtu.be/Jl2QKJZeozE[/ame]

[ame]http://youtu.be/sy2FlHeMYkc[/ame]

[ame]http://youtu.be/f9urvqmxyJg[/ame]

Looking good so far!

Zeek full carbon kit ordered last night from evasive should take about 3 weeks to come from Japan super excited after than will be an open flash and front/over pipe!

Scored laile parts straight from Japan via rakuten. After shipping it came a little less then stateside vendors can't complain. I will keep you posted on shipping duration, and ect.

17x9 rota grid hyper black

Got the M7 air filter today from Topgearsolutions.com. Car is breathing much better now best part about this filter is the rubber gasket around the edges like the apexI filter. Going to flow and filter much better from that rubber seal.

Had to take the airbox out and literally stand on it to get the clips to shut on the airbox. It's rubber seal is much thicker that the stock filter.

Went to the Clark's travel to get race gas thanks @DesertFrs

Exhaust is crooked and will be fixed tomorrow night that's why I haven't posted to many pics but soon it will be perfect. Rocking some 93oct :burnrubber:

This pic no coils stock suspension

Got my new laile stiffening bars. Came direct from Japan in less than two weeks!:burnrubber: really surprised they came this fast. Got them directly from laile cheap!

Debadged the frs and rebadged toyota symbols in plasti dip today pics come tomorrow!

Plasti dip came out clean and I had lots of fun with the learning curve as it is very forgiving! All in all a great way to change the look of your car and its only 6 bucks a can at home depot. Barely used one half to paint 7 coats on each emblem.

Buddy club racing coils ordered! Vis ams trunk and buddy tails soon to follow! Lots of good stuff coming. Off to work!

Update 11/13/13 buddy club tail lights in!

Got my buddy club tails in I think I'm one of the first people in the country to get them! Big thanks to Justin at rockstar garage and Tom at buddy club! You guys are awesome

[ame]http://youtu.be/mTqOmXfBCzg[/ame]

https://www.facebook.com/groups/****...0650911001219/

Picking up buddy club racing spec coils today!

:bow:

Coils are in thanks to @DAMotorsports and @DesertFrs for hooking me up with the install on such short notice and at a great rate! You guys rock!

Pics follow up tomorrow!

The car is tighter, the wheels feel way more planted I am super happy with this upgrade and can't wait for my first track day!

It was a pleasure, happy we could get you taken care of in such short notice. Enjoy your ride and we look forward to assisting you again.

How do you like these coilovers? hows the ride?

Firm and planted haven't dialed them in yet waiting for them to settle in and then the adjustments can be made. Bumpier than stock but not much more road noise honestly. The corners feel great! Flat around corners with plenty of room to push it further. I'm loving it and learning it too so ill let you know as time goes on @wallace03

@DAMotorsports can't wait to get them dialed in! Thanks again you guys a kick ass!

Gonna drop it another inch probably

Here's the clearance on a 1 inch drop

Here's the clearance on a 1 inch drop

Would like to drop the. Car. More. We are a little worried about the pipe to ground clearance but it may not be a problem. As for the bounce we can adjust the shocks a bit

Sweet sounds good man!

Got the intake in the mail today so I got a project for thanksgiving lol!Took a little while to receive from Japan but this is the full carbon intake Kit from Zeek found www.evasivemotorsports.com

Sorry it took a little long from Japan Paul but hey you are one of the first ones getting it in the US :thumbsup: Let us know how you like it!

-Randy

Just got off work man gonna stay home and molest my new intake lol :thumbsup:

No worries on the lead time I am no rookie when it comes to stuff from Japan I'm a cook and order my knifes and some car parts from rakuten.com. randy and Dennis are the guys to talk to if you want this intake and soon as I have some dyno info I will throw it up for everyone to see! Thanks again to evasivemotorsports.com for the professional service and awesome product!

Haha no problem man. You are a good customer and friend of ours anytime you need anything let us know. :bonk:

side profile pic?

Of the car or the intake?

car pleasee

for you my friend! Ill take a better one tomorrow

Update 11/26 cars suspension is dialed in and feels great! Pics on the intake coming soon

Did it come with the sound tube delete?

Yes it did I will be posting pics soon

Gained power lost torque lots of variables my tuner said. :iono:

Overall the car feels great and the engine bay looks bad ass now. The laile front stiffening bar and rear end bar really make the car feel more responsive. ;)

Boom!

Engine bay

hows the clearance from the pipe to the belt. My Perrin one is ripping, So im looking for replacement

I haven't heard no rubbing from the belts but now that you have brought this to my knowledge I will look at the tube. The tube is extremely light and thin much thinner than a rubber/composite tube. Thanks for the heads up @*KID*

12/13 new nittos arrived going on really soon