Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Brakes, Suspension, Chassis (https://www.ft86club.com/forums/forumdisplay.php?f=63)
-   -   FS: 2004 STi Gold Brembos(5x100) w/Hawk Pads, Rotors, lines!~~MINTTT~~ (https://www.ft86club.com/forums/showthread.php?t=49236)

nemesisdrift 10-16-2013 04:48 PM

FS: 2004 STi Gold Brembos(5x100) w/Hawk Pads, Rotors, lines!~~MINTTT~~
 
These are taken right off a friends 2004 STI with about 55k miles

Comes with
Calipers
Lines
Rotors
Hawk HPS Pads

Put them on your WRX or BRZ or what ever cool stuff!

http://i4.photobucket.com/albums/y13...ps6aa07e5b.jpg

These are the nicest calipers i have found on the board in a while.

I'm asking 1020$ Shipped and paypal'd ANYWHERE IN THE LOWER 48!

pm me or txt me for fastest response

605-951-7018

InvalidJohnny5 10-21-2013 02:26 PM

700?

Vten 10-21-2013 08:29 PM

ooooh another mint sets!! I would've jumped on this if I didn't happen to got the set a couple of weeks ago.

GLWS sir Nemesis!

SmsAlSuwaidi 10-22-2013 03:48 PM

How hard is this install, i really want them :(

what more parts would i need to install them other than these

Vten 10-22-2013 05:51 PM

This is what I did with mine, U need the 08+ Subaru custom brackets for the rear from the kns or fastwrx, dba 4000 T3 04+dual drilled front rotors , dba 4000 T3 dual drilled 08+ rotors , and also you need to swap the nipple bleeders to the other side , also the ss stoptechs sti lines

Let say the original brembo seals aren't good, then you also need to replace them, about $200 for both front and rear .

Basically it ..., I spent about $2000 for the whole project including the powdercoating job into a ice white finished with a starlight clear coat and the red lettering .

You can save alittle bit by buying oem rotor ... Shop around .

killerkid08 10-24-2013 08:04 AM

Quote:

Originally Posted by Vten (Post 1286453)
This is what I did with mine, U need the 08+ Subaru custom brackets for the rear from the kns or fastwrx, dba 4000 T3 04+dual drilled front rotors , dba 4000 T3 dual drilled 08+ rotors , and also you need to swap the nipple bleeders to the other side , also the ss stoptechs sti lines

Let say the original brembo seals aren't good, then you also need to replace them, about $200 for both front and rear .

Basically it ..., I spent about $2000 for the whole project including the powdercoating job into a ice white finished with a starlight clear coat and the red lettering .

You can save alittle bit by buying oem rotor ... Shop around .

So why not buy bbk ?

UltraMarine86 10-24-2013 12:25 PM

these still for sale?

bkblitzed 10-24-2013 03:32 PM

o dang i didnt know 04 brembos fit.. hmm

Sportsguy83 10-24-2013 04:06 PM

Quote:

Originally Posted by killerkid08 (Post 1290179)
So why not buy bbk ?

BBK = ~$4- $5K for front and back, so he did front and back Brembos for half, $2K

killerkid08 10-24-2013 06:25 PM

I have been informed, someone buy these.

UltraMarine86 10-24-2013 06:25 PM

Trying lol

Sent from my SCH-I605 using Tapatalk

Sportsguy83 10-24-2013 06:31 PM

I believe a bracket is needed to fit the caliper in the back? Also, I'd recommend anyone to take this kit, get new rotors and rebuild them. Still will be under $2K. Great price!

Vten 10-24-2013 07:01 PM

Quote:

Originally Posted by Sportsguy83 (Post 1291482)
I believe a bracket is needed to fit the caliper in the back? Also, I'd recommend anyone to take this kit, get new rotors and rebuild them. Still will be under $2K. Great price!

X1000!

That what I did. Rebuild, and use new everything.

You can get The rear bracket at fastwrx.com or knsbrakes.com ...I got mine from the fastwrx, it was the last one in stock a couple of weeks ago.
Make sure to get the 08+ bracket for this Goldies brembo .

OrbitalEllipses 10-24-2013 07:21 PM

Quote:

Originally Posted by Vten (Post 1291540)
X1000!

That what I did. Rebuild, and use new everything.

You can get The rear bracket at fastwrx.com or knsbrakes.com ...I got mine from the fastwrx, it was the last one in stock a couple of weeks ago.
Make sure to get the 08+ bracket for this Goldies brembo .

I love you for actually reading the tens of posts I and others have made on this.


All times are GMT -4. The time now is 11:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.