Splitter Brackets
 

I'm not sure if there are any off the shelf splitter brackets available for the twins so I thought I'd try and take a stab at it.

If there Any FRS/BRZ owners in the Lincoln or Omaha (if you're willing to drive) area interested in having Canards/Splitter brackets mocked up? I'm looking to start making aero products for the twins and just need a product development car.

The brackets I've made thus far cater to the Honda scene mainly because that is what I have readily available but you can see some of my current work on FB at Anointed Aero or on IG @anointed_aero. Just let me know.

http://farm4.staticflickr.com/3806/9...527a93243e.jpg
IMAG0303 by anointeddc5_13, on Flickr

http://farm6.staticflickr.com/5512/9...288f46bafe.jpg
IMG_20130924_093430 by anointeddc5_13, on Flickr

nice work, my car is constantly used for development duties, to bad Im a little far away

Good luck with the product op, it looks good

Thank you guys, hopefully I can get a local to come by and get something going for all of you!