HELP Raceseng full pulley kit torque setting?
 

In the middle of the install and the instructions say to 94ft lbs on the crank but not sure about the other pulleys. It says to use the same as stock specs. Anyone have those?

Sent from a Motorola DynaTAC 8000X now Free

search on the forum the brz fsm is available to download

Sorry didnt have time or access we were in the garage. We got it all together. Thanks

Sent from a Motorola DynaTAC 8000X now Free

Might be good to have that here in this thread now too since this will most likely be a search result now.
May I suggest editing your first post with that information?

as far as I remember:
crank pulley - 10ft·lbf + 90 degree or 94fr-lbf
water pump pulley - 10ft·lbf
generator pulley - 80ft-lbf

OP whats your opinion of the pulley set?

You want to ask @Redsun03 they are on his car.

Sent from a Motorola DynaTAC 8000X now Free

We've been able to play with these and they are amazing quality wise. They are also super light. Quick way to shed some rotating mass, and get some more revs.

http://ft86speedfactory.com/engine-4...nufacturer=139

They are extremely well machined. And light as all hell. Almost frightening.

Sent from a Motorola DynaTAC 8000X now Free