Whiteline releases their roll center/bump steer correction kit for the BRZ/FRS!
 

Nice. Anybody who is lowered (especially more than 1") should consider this.

I noticed this on their site the other day when I was looking for updates on the upper mounts, looks like a good value!

Thank guys! I have always used these on all my older lowered Subaru's and loved them, I was really excited when I saw them for the Twins! And like @tech4pdx said, these would be ideal for anyone who has lowered their car, to help bring the front suspension geometry back into check :)

And not sure if this belongs here, but I also found out we have them in stock as well!

Thanks,
Rick

How low do you need to be before this becomes necessary?

How is the quality of their ball joints? Not impressed with their end links and some other parts thus far.

How many inches of lowering does this kit correct for? It's fixed and not adjustable, right?

Really any drop of about an inch or more would benefit from this roll center kit. They are not adjustable, and are a direct replacement for the factory tie-rod ends and ball joints.

I have run these on pretty much all my Previous Imprezas and Legacies and have been nothing but impressed with the quality. They have held up to our harsh winters and my harsh driving for years haha.

Hope this helps.
Thanks,
Rick

I've got a set in the box waiting to go on my car. Should have them mounted sometime this month.

Whoever gets em installed and some time on em PLEASE make a review with thoughts!!

So Rick..

I'm approx 1.250" lowered on KWs and using Vorshlagg plates up front which ass one degree castor as is. These new WL ends you'd still deem as a good upgrade?

You must need to update your webby as can't locate em?..

What's the warranty like on these?

Awesome! You will have to let us know how you like them. :)


You bet, these would be awesome and would really help the front geometry come back to factory specs. These plus the additional castor from the plates would make for an amazing car.

Also we are getting photos for them and they should be up on the site shortly :)



1 year warranty! We also offer our RSD guarantee with this, but I won't get into that as I don't want to turn this into a for sale thread haha.


Also I cannot confirm or deny that these will be going on one of the BRZ's here very shortly. Wink wink, nudge nudge ;)

Thanks guys!
Rick

Have had the impreza kit on my forester for a few years and maybe 40k ish miles now, no issues including new England salt fest winters.

This is the set i have iirc http://www.fredbeansparts.com/media/...k/c/kca313.jpg

The finish of my whiteline fsb on the vehicle on the other hand looks like shit after a few winters, but thats apparently common for whiteline sways and salt.

They made a fantastic difference on that vehicle, but the lowering was much more drastic (sti struts, rce black springs and later crossmember spacer delete to correct lowered forester geometry further). Plus whiteline was fantastic to deal with sending me a couple boots for free when i was an idiot and tore one.

Anyone get these installed yet?