Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Blitz Nur Spec C-Ti Catback Exhaust (https://www.ft86club.com/forums/showthread.php?t=47942)

KONVERTER 09-30-2013 05:27 PM

Blitz Nur Spec C-Ti Catback Exhaust
 
For my second cat-back I opted for the Blitz Nur-Spec C-Ti Cat Back exhaust with resonated mid-pipe. I originally had the Borla Cat back w/ Diffuser on the car but it didn't really fit where I want to go with this car (I don't really want the rear diffuser and don't like the exhaust without it).

Anyway... On to the Blitz... Car is a BRZ w/ TRD Intake, PPE Equal Length Long Tube Header, Berk Technologies High Flow Cat, all blowing out the Blitz.

This exhaust fit my must have criteria... Side mounted muffler to fill up underbumper gap, nice looking tips, compact resonator.

First impression: This exhaust has perfect fitment. The burnt Ti tips match the WRB beautifully. The sound is nearly silent. Quiet rumble at idle, under load there is the perfect amount of rasp with a soft hollow sounding growl. 3-3.5K cruising is nearly silent. Overall a wonderful exhaust for someone who wants the look without attracting too much unwanted noise attention.

http://img.photobucket.com/albums/v4...ps89fb826e.jpg

http://img.photobucket.com/albums/v4...ps2fb83ef5.jpg

http://img.photobucket.com/albums/v4...ps6e0ee36d.jpg

pierce88 09-30-2013 05:50 PM

I know you didn't like it but would the rear diffuser fit with this exhaust?

-Pierce

KONVERTER 09-30-2013 06:00 PM

The borla specifically? No.

Other diffusers will fit I am sure.

I don't have anything against them but want the option to not use it and not have the air pocket

Sent from my Nexus 4 using Tapatalk 4

zoomzoomers 09-30-2013 06:03 PM

Pics of the underside of the car? Including your new muffler? Looks good BTW. :w00t:

KONVERTER 09-30-2013 06:20 PM

I'll grab when I put the JDM under panels on

Sent from my Nexus 4 using Tapatalk 4

KONVERTER 10-06-2013 10:30 PM

Quote:

Originally Posted by zoomzoomers (Post 1242585)
Pics of the underside of the car? Including your new muffler? Looks good BTW. :w00t:

Here is a rear muffler shot by request:

http://img.photobucket.com/albums/v4...ps91240748.jpg

likebutter 10-07-2013 11:37 PM

Quote:

Originally Posted by pierce88 (Post 1242549)
I know you didn't like it but would the rear diffuser fit with this exhaust?

-Pierce

I have the Blitz exhaust, too with the OEM rear diffuser. Perfect fit and still loving the exhaust!

http://i1134.photobucket.com/albums/...itzcloseup.jpg

http://i1134.photobucket.com/albums/...ensedelete.jpg

ap5512 10-08-2013 03:32 PM

Love the exhaust on the car. If you don't mind me asking, how much did you have to shell out for one?

KONVERTER 10-09-2013 02:51 AM

ive put a bit of miles on it and the sound seems to have opened up a bit. love it!

xDanger_208x 02-10-2014 02:24 PM

Hmm.. this looks like a very nice piece.
Now I've got it narrowed to:
- Blitz
- Milltek
- Perrin
- Invidia Q300

I want quiet, a little bit of a weight loss and quality. Looks like this one fits all of those.

1ofaKind 02-10-2014 03:40 PM

Nice exhaust man!

finch1750 02-10-2014 05:56 PM

Quote:

Originally Posted by KONVERTER (Post 1242513)
For my second cat-back I opted for the Blitz Nur-Spec C-Ti Cat Back exhaust with resonated mid-pipe. I originally had the Borla Cat back w/ Diffuser on the car but it didn't really fit where I want to go with this car (I don't really want the rear diffuser and don't like the exhaust without it).

Anyway... On to the Blitz... Car is a BRZ w/ TRD Intake, PPE Equal Length Long Tube Header, Berk Technologies High Flow Cat, all blowing out the Blitz.

This exhaust fit my must have criteria... Side mounted muffler to fill up underbumper gap, nice looking tips, compact resonator.

First impression: This exhaust has perfect fitment. The burnt Ti tips match the WRB beautifully. The sound is nearly silent. Quiet rumble at idle, under load there is the perfect amount of rasp with a soft hollow sounding growl. 3-3.5K cruising is nearly silent. Overall a wonderful exhaust for someone who wants the look without attracting too much unwanted noise attention.

Any chance you could get a video? I really want to hear this with the full system (headers, fp). :thanks:

KONVERTER 02-13-2014 10:39 PM

Quote:

Originally Posted by xDanger_208x (Post 1518181)
Hmm.. this looks like a very nice piece.
Now I've got it narrowed to:
- Blitz
- Milltek
- Perrin
- Invidia Q300

I want quiet, a little bit of a weight loss and quality. Looks like this one fits all of those.

Then this is the exhaust for you... Very quiet compared to some other cars.

Per request I will do a video this weekend... Maybe can do a little something tonight.

Intake / Long Tube Header / Catted Front Pipe / Cat Back / Tune

KONVERTER 02-14-2014 04:19 AM

Quote:

Originally Posted by finch1750 (Post 1518819)
Any chance you could get a video? I really want to hear this with the full system (headers, fp). :thanks:

Here are a few video's...

Revving and bouncing off launch control revlimiter
[ame]http://youtu.be/WRgc_P2HlxE[/ame]

cold start windows closed and windows open idle, outside too.
[ame]http://youtu.be/jctlvb9ZnNk[/ame]

driving (not spirited) doggie in car so taking it easy...
[ame]http://youtu.be/uJn1wkS3JJQ[/ame]


All times are GMT -4. The time now is 05:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.