Questions on AVO Breather Kit?
 

I just received my AVO Breather kit from CarModsAustralia.

This is it - http://www.carmodsaustralia.com.au/a...-s6z12g0qb0tct

Unpacked it and found that there is no instructions or any form of information.
It also doesn't look like the tank in all of the pictures I saw before buying it.
Here is what I got:
http://i1293.photobucket.com/albums/...ps66c8f55d.jpg

Is this the right kit and if so, are they any installation instructions anywhere on the net? I had a look and cant find any..

Any help would be much appeciated!

Have you called Carmods?

Daniel and Rob are great guys, but obviously don't inspect the contents of every box they send out.

Just spoke to Daniel then. He's sending me a link to some installation instructions. See how I go from there.

Turns out this kit bolts onto where the factory (and vortech) airbox is fitted.

Can anyone tell me if the kit shown in the picture below will work with the vortech kit?

http://i1034.photobucket.com/albums/...ps68facbb2.jpg

Ben, I reckon you've posted the wrong picture but the tank in your first post looks very much like it is made to fit where the factory airbox resonator sits.

If so, there's no chance it will fit a Vortech in place.

Sorry the second picture is the kit I need. The first one is the one I got. I believe the second picture is of the N/A breather kit but I've seen people using it on FI engines. Just wondering if it'd be ok to use with the vortech kit?
I would assume the replacement PCV that comes with the vortech kit should mean the N/A tank kit could work. If so, I need to send back the kit I got and get the other.

Sorry if this isnt making any sense haha

It makes sense and you're right, you need the kit in the second picture.

Thanks. Now I just need someone to tell me how to plumb this kit when used with a vortech