86 Motoring Lightweight Pully Kit - Impression
 

Straight forward install once everything was out of the way. Took maybe 20-25 mins with some goofing off. Might be a "little bit more difficult for the common drive if you don't have a socket big enough for the alternator bolt. But easy to solve buy borrowing from a friend who has one. Crank pully had a significant amount of weight difference, with the alternator and water pully only have a slight difference in weight but give the engine bay especially mine the much cleaner look I am going for. Throttle response has increased a good amount. Much smoother pull through the RPMs now in my opinion. Not sure how much horsepower I have actually gained if any, but with the better throttle response, the car is much more fun to drive. Overall I highly recommend this kit! @86motoring

Tools Needed:
10mm Socket
14mm Socket
22mm Socket
24mm Scoket
Ratchet Wrench
Cheater Bar
Torque Wrench

Pics:
Installed -
http://i1206.photobucket.com/albums/...ps49417e41.jpg
http://i1206.photobucket.com/albums/...ps38158679.jpg
http://i1206.photobucket.com/albums/...psd2446664.jpg
Crank -
http://i1206.photobucket.com/albums/...psa385cdf9.jpg
Alternator -
http://i1206.photobucket.com/albums/...pse7b6cbaf.jpg
Water Pump -
http://i1206.photobucket.com/albums/...ps74b0bae7.jpg