Excelerate Performance: Introducing the Unorthodox Racing Stock Diameter Crank Pulley
 

http://i34.photobucket.com/albums/d1...LR8LogoJPG.jpg


Excelerate Performance is excited to announce and inform FT86club of the release of the Unorthodox Racing Stock Diameter Crank Pulley for the BR-Z/FR-S!!! We have worked heavily with UR in the past and their product is second to none. They private label several pulleys for the XLR8 brand and we could not be more happy with their product, customer service and reliability. We have been waiting a while for them to release this pulley and are very excited to see that it has finally arrived.

For those of you who aren't familiar with Unorthodox Racing, here is a brief description of who they and who they strive to be:

http://216.70.68.21/media/wysiwyg/SU10151AF-L.jpg

UR = The first power pulleys for American, Asian & European sport compacts.
UR = Always the lightest pulleys, the biggest HP gains and the most gas savings.
UR = Always the leader in HP increase per dollar.
UR = Always CAD designed & CNC machined in the U.S.
UR = Always perfect balance, no wobbling, hopping and they fit right the first time.
UR = Always the finest finish, ready for anodizing or plating of any kind.
UR = Always the most comprehensive warranty (5 years) for peace of mind.
UR = Always the widest range of applications.
UR = Always the best technical and customer service.
UR = 16+ years of "real world" use from street to strip to rally to road course.


Right now the Crank Pulleys for the BR-Z/FR-S are only going to be sold by themselves. In the near future, once UR gets their shipment of Gates belts, they will be sold with the stock Gates belt. So if you don't have a lot of miles on your stock belt and just need the pulley, now would be the time to act.

Without further adieu here is the UR Stock Diameter Crank Pulley for the BR-Z/FR-S:

Weight: 10 oz

http://www.unorthodoxracing.com/medi...s1321afl_2.jpg

PART NUMBER: CS1321


http://www.unorthodoxracing.com/medi...s1321arl_2.jpg

MSRP: $227

http://www.unorthodoxracing.com/medi...cs1321sl_2.jpg

Availability: IN STOCK


There aren't any official dyno numbers as of yet as it takes the ECU about a week or so to fully adjust to the pulley. But, Unorthodox says that based on their conservative weight reduction to HP calculation this pulley should pick up about 8-12 whp! They are usually pretty accurate with these calculations as we have dyno'd other pulleys and found the results to be within their calculated range!


Please comment and leave feedback and/or any info you may have in regard to this product in this thread!

Beautiful

Nice!! The pulleys market competition is heating up!!

They really do make a very aesthetically pleasing product that is just as functional and reliable as it is nice to look at. I'm ordering my shortly!