Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   BRZ First-Gen (2012+) -- General Topics (https://www.ft86club.com/forums/forumdisplay.php?f=23)
-   -   BRZ Ts parts (https://www.ft86club.com/forums/showthread.php?t=45255)

Fizz 05-29-2014 12:34 PM

Quote:

Originally Posted by mister.bond (Post 1765794)
i just have tried a 20mm Spacer for one REAR Wheel for a Test.

Its a little bit too much :(

cause my michelin 225/40 R18 Pilot Super Sport
comes small out of the BRZ-Body

I want it as clean as possible without any little issue.

So tomorrow i take :
15mm Spacers for Wheels Rear ( 30mm REAR Axle extent )
and 10 mm Spacers for Wheels Front ( 20mm FRONT Axle extent )

By the way you might want to consult some experts such as @CSG Mike on the effects on handling (understeer/oversteer) by having a wider rear track on your car.

chanomatik 05-29-2014 12:35 PM

Yeah 15mm seems to be about perfect. I'm on +53 18x8.5 STI BBS wheels with 15mm spacer adapters all around and they're perfectly flush against my BRZ. On my WRX I used 25mm spacer adapters all around with +53 18x8.5 STI Enkei wheels and those also sat flush against that car.

With a +48 18x7.5 STI Enkei, a 15mm spacer would be cool. I had to shave my studs to make mine fit since there wasn't enough pocket spacing in the wheels to clear the studs. I shaved approximately 10mm.

DSOmegaX 05-29-2014 03:08 PM

US version just got announced, pretty disappointing, all cosmetic:

http://www.autoguide.com/auto-news/2...-upgrades.html

Basically the Australia S-pack with a different interior, but it doesnt even have the springs or strut tower. I do like the blue stitching but the blue accents...ugh ><

The359 05-29-2014 03:19 PM

This should make ordering parts cheaper persumably since they'll all be available from dealers. Might have to pick up some underbody panels that way.

mister.bond 05-29-2014 03:28 PM

i like the blue leather seats very much.

currently i still have the standard cushion seats.

the car is new and the seats also :)

that is the reason why i want to use it for a time before i change to leather.

but i must say for Cushion Seats they are very well made and very

convenient :popcorn:

AznBRZer 05-29-2014 03:45 PM

JDM tips...LOL

CSG Mike 05-29-2014 03:48 PM

Quote:

Originally Posted by Fizz (Post 1765974)
By the way you might want to consult some experts such as @CSG Mike on the effects on handling (understeer/oversteer) by having a wider rear track on your car.

Unless you're making huge changes, I wouldn't worry about it for the average person.

mister.bond 05-29-2014 03:50 PM

Quote:

Originally Posted by CSG Mike (Post 1766412)
Unless you're making huge changes, I wouldn't worry about it for the average person.


what do you mean with that ?

CSG Mike 05-29-2014 03:58 PM

Quote:

Originally Posted by mister.bond (Post 1766420)
what do you mean with that ?

It won't make an appreciable difference for most people. If you're not measuring your car to figure out your own motion ratio, you won't care about the track width.

Createddeleted 05-29-2014 04:15 PM

I've been wanting to get the sti lip kit, but now since the parts are available I want

- red push button start
- aero under panels
- wheels
- dash
- sharkfin

MUST FIND USDM PART NUMBERS

DSOmegaX 05-29-2014 04:17 PM

Quote:

Originally Posted by Createddeleted (Post 1766469)
I've been wanting to get the sti lip kit, but now since the parts are available I want

- red push button start
- aero under panels
- wheels

MUST FIND USDM PART NUMBERS

You should still pick up the JDM STi push start =D the usdm version design looks cluttered

Sent from my Nexus 5 using Tapatalk

Createddeleted 05-29-2014 04:20 PM

Quote:

Originally Posted by DSOmegaX (Post 1766476)
You should still pick up the JDM STi push start =D the usdm version design looks cluttered

Sent from my Nexus 5 using Tapatalk

Agreed, now that I look at it, I wonder why they stacked the wording.

DSOmegaX 05-29-2014 07:35 PM

Ts coil spring set just arrived. First confirmed that the springs are exactly the same as the springs separately. Its the same part numbers

Sent from my Nexus 5 using Tapatalk

Wafflejuice 05-29-2014 07:43 PM

Quote:

Originally Posted by Createddeleted (Post 1766469)
I've been wanting to get the sti lip kit, but now since the parts are available I want

- red push button start
- aero under panels
- wheels
- dash
- sharkfin

MUST FIND USDM PART NUMBERS

I dont think the rims will be available.
I asked about them and I got this for a response:

The STI rim will not be available otherwise from factory.


All times are GMT -4. The time now is 06:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.