Ray's GramLights 57FXX
 

Hi guys! I'm quite new to this car and am seriously looking to get these wheels for my Red MT ( stock brakes, stock ride height, stock suspension etc.)

http://www.rays-msc.com/wheels/img/57FXX-BM.jpg

I'm currently using the standard 17" wheels and they're a bit bland imo. Was looking to get these in 18" form with probably in 8.5J or 9J. I believe that the FRS/86 uses a PCD 100, no?

HOWEVER, I'm not very sure about the offset sizes (and the confusing Face 1 or 2 selection), which is why I'm writing this post. Any suggestions, comments or advice on this matter? Would 9J be too much?

Many thanks in advance.

Already have these preordered for myself. They won't be out till Oct...at least for the North America market.

Face 1 and 2 is just the concavity of the wheel...face 2 being more concave. I'm going with the 18x9.5 squared setup

Hmm, I've just checked the size chart. Apparently they don't offer these in 18 x 9.5J for 100 PCD. Only 114.3.

And what offset are you looking at? Thanks.

This is cool style black wheel. Someone need to confirm or go after them for x100. They can't skip the twin :)

From what the vendor that I bought it from told me, they do offer it in 18x9.5 in the 5x100 and that its not listed yet. I got the +38 offset.

those look amazing

It think 18x9.5 plus +38 will be poked. Do they have +42 ?

For the fronts it'll poke for 9.5 +38, but can be fixed with camber. Rears should be flush.

Have just ordered a set of these after contemplating for a few days - Black | 18" | 8J | +45 offset. Most likely paired to 225/40/18 rubber and stock suspension.

Unfortunately, it will take around 2-3 months for them to arrive. Will post photos then.

Can we get photos posted of these wheels mounted so I can get them into the Wheel Directory?

The 1st shipment of these wheels got delayed to December/January. :(