Engin Link OBD II Custom PIDS?
 

Anyone know of any? I'm specifically looking for one for oil temp.

Here's the info for Torque that is apparently working for others:

OBD2 Mode and PID: 2101
Minimum Value: -40
Maximum Value: 215 (this is just the maximum that this location can support, which does not mean the sensor can read that high)
Scale factor: x1
Unit type: C
Equation: AC-40 (no space between A and C; "AC" is the location within the response)
OBD Header: 7E0 (Auto also works, but seems to take longer)

Source: http://www.ft86club.com/forums/showp...00&postcount=2

I know that the Vbox Data logger has a OBD2 cable that will also get Transmission Gear, Steering Angle, Braking, and others. I just don't know where to get the data to create the Customer PID.